Strange 28-31 Spline Alloy Axle Package                                                         With Axle Bearings & Wheel Studs

/, Custom Axle Packages / Components, Custom Alloy Axle Packages, Street / Track, Axle Packages / Components, Alloy Axle Packages, Ford, Axle Packages / Components, Alloy Axle Packages/

Strange 28-31 Spline Alloy Axle Package                                                         With Axle Bearings & Wheel Studs

Strange 28-31 Spline Alloy Axle Package                                                         With Axle Bearings & Wheel Studs

$405.00

Part Number: P3102

Out of stock

Alloy axle packages are optimized for street & track use
See our Hy-Tuf axles for maximum torsional strength for all out Drag Racing

Alloy Applications & Splines Available
Chevy 8.2 10 bolt…… 28 / 33 **
Chevy 8.5 10 bolt…… 28 / 30 / 33 **
Chevy 12 bolt car…… 30 * / 33 ** / 35 ***
Dana 60…………………. 35 ***
Ford 8.8…………………. 28 / 31 * / 33 ** / 35 ***
Ford 9″…………………… 28 / 31 / 35 ***
Mopar 8 3/4…………… 30 / 35 ***
57-64 Olds/Pontiac… 35 ***

*     Also available in c-clip style replacement axles
**   33 spline Alloy packages… See P3302 / P3304
*** 35 spline Alloy packages… See P3502 / P3504

Notes For This Axle Package
All Chevy & Ford 8.8 require replacement 3.150″ housing ends
Packages with C-clip Eliminator kit for OEM housing ends are shown below

Dana 60 and Mopar 8 3/4″ Using Stock Style 2.875″ I.D. Mopar Housing Ends
These applications require bearings with integrated retainer plates – See P3104

This Axle Package Includes:

Alloy Axles – A3100
– Forged from modified 1550 premium steel
– Majority of machining performed before heat treat to provide consistent hardness
– Induction hardened to Rc 58-62 to increase torsional strength while remaining ductile
– Finish machined after heat treat to ensure accuracy
– Choice of 28 up to 31 spline
– Lengths up to 34 1/2″
– Choice of bolt circle
– Forged in the USA
– Designed and machined by Strange Engineering

Choice of Axle Bearings (Maybe limited to housing end type)

Timken® Tapered Unit Bearings – A1013
– Designed for use with 3.150″ housing end
– Best for side loading and high mileage
– Includes outer seals and locking collars
Note- May require new retainer plates if originally use a ball style bearing

Sealed Ball Bearings – A1021 / A1023A
– Low friction bearing
– Life reduced during prolonged use
– O.D. grooved for o-ring to eliminate inner axle seal
– Includes o-rings and locking collars

Choice of Press-in or Screw-in Wheel Studs
– Press-in 7/16″-20 or 1/2″-20 OEM style factory length studs – A3130 / A3121 / A3151
– Screw-in 1/2″-20 chrome moly studs in 2″ or 3″ long – A1025 / A1026
– Metric screw-in studs in M12-1.5 x 50mm – A1035
– Screw-in studs include .060″ hardened washers
– Length is measured from underneath the hex of the stud

Options
Install axle bearings…………………. See A1008
Access hole or extra bolt circle… See A1004

Other 28-31 Spline Alloy Axle Packages
With retainer plates…. See P3104
With spool……………….. See P3102S / P3104S

Alloy C-clip Style Replacement Axles
GM 12 bolt…. See P3020 / P3026
Ford 8.8……… See P3110 / P3111 / P3112

Street / Track Axle Packages With C-Clip Eliminator Kit
OEM Chevy car ends in 30 or 33 spline……………. See P1011GOT
OEM Chevy car ends in 35 spline…………………….. See P3509G12
OEM Ford 8.8 ends in 28 or 31 spline…….. See P3109F86 / P3109F94 / P3109F05
OEM Ford 8.8 ends in 35 spline……………… See P3509F86 / P3509F94 / P3509F05

Pro Race Axle Packages
With bearings & studs……. See P1007
Including retainer plates… See P1008

This product is only available from an Authorized Strange Dealer or Factory Direct Call - 847.663.1701 or Email Us

Description

Ford , Mopar or Chevy Alloy axles, bearings, & wheel studs

Additional information

Weight 41.05 lbs

You may also like…