Housing Ends Symmetrical - For 3.150" OD Bearing
Axle Bearing With Locking Collar - Each For 3.150" ID Housing End Fits Axles With 1.532" Bearing Area
Strange 1350 Series Transmission Yoke Mopar 30 Spline - Severe Duty Chrome Moly
Hyperco Springs 10" x 2 1/2" I.D. - 350 Lbs
Ford 9" Ring Gear Bolts 7/16" For Clutch Style Differentials
Conversion U-Joint 1310 Series To 1350 Series
Strange Ultra Case and Support Package 3.812" Bore Case & Tapered Bearing Support With Installation Kit For 9" or 9 1/2" 35 Spline Pro Gears
Dana 60 Internal Bearing Kit Fits OEM Dana 60 Only
Pinion Support Bearing Kit For 35 Spline Pinion
Strange Ultra Case and Support Package 3.250" Bore Case & Taper / Ball Bearing Support With Installation Kit For 9" or 9 1/2" 35 Spline Pro Gears
Rear Pinion Bearing Fits Strange Ultra & Billet Cases With Tapered Bearing Support and 28 or 35 Spline Pinion Gear
Ford 9" 3.60 Pro Gear with 35 Spline Pinion Richmond Gear - Produced in Italy
GM 8.4 Corvette 3.36 Gear Set Richmond Gear - Produced in Italy
Strange Dual Remote Reservoir
Hyperco Springs 12" x 2 1/2" ID - 85 Lbs
1986-2014 Ford 8.8 Basic Installation Kit Bearings & Races Are Not Included
Strange 2 Pc 1350 Series Transmission Yoke GM 27 Spline - Severe Duty Chrome Moly For Roller Bearing Extension Housing
Ford 9" Pinion Seal For Ball Bearing Support Using 35 Spline Pro Gear
3 AN With 1/8" NPT Tee-On-Run Fitting
1 Magnet Pick-Up Collar For Strange 9" Ford Premium 28 Spline Yokes
Mopar 1/2" Press-In Wheel Studs 
Strange 5/8"-18 x 3" Sleeve Style Stud Kit 
Axle Bearing With Locking Collar - Each For Small Ford 2.835" ID Housing End Fits Axles With 1.5635" Bearing Area
Caliper O-Ring Kit For 1995 & Older Strange Two Piston Caliper
Strange HD Pro Aluminum Case Kit - 3.062" Bore With Taper/Ball Bearing Pinion Support
Strange Evolution 1 Dynamic Drive Mount Front Brake Kit For Strange Aluminum Struts & Spindle Mount Wheels Evolution S Rotors, Single Piston Evolution 1 Calipers & DTC-30 Semi Metallic Pads
Single Adjustable Rear Coil-Over Shock 1982-2002 Camaro, Firebird, & Trans Am - Spring Sold Separately
Dana 60 Aluminum Main Caps Includes Bolts - Machining Required
Mopar 8 3/4" 3.91 Standard Gear - 489 Case Motive Performance Gear - Produced in Italy
1986-2014 Ford 8.8 Complete Installation Kit Will Not Fit 2013-2014 Shelby GT500 / GT Track Pack
Mopar 8 3/4" 4.56 Standard Gear For 742 Case & 10 Spline Yoke Richmond Gear - Produced in Italy
Strange Pro II M/D Front Brake Kit Strange Aluminum Struts - 4 1/2" BC 2 Pc Rotors, 2 Piston Calipers & Semi Metallic Pads
Rear Bearing Spacer Washer
Spring Seat Adjuster Wrench For Strange Shocks & Struts
Dual Master Cylinder - 1.032" Bore Includes Dust Boot, Pushrod, & Fittings
Ford 9" 4.11 Standard Gear Set Motive Performance Gear - Produced in Italy
GM BOP 8.2 10 Bolt 3.55 Gear For Buick / Oldsmobile / Pontiac Motive Performance Gear - Produced in Italy
Basic Installation Kit Mopar 8 3/4" - 489 Case Bearings & Races Are Not Included
Single Adjustable Front Shock Multiple GM Applications
Timken® Tapered Race Used In Multiple Applications
Side Bearing Kit Ford 9" with 3.250" Bore Case
Tapered Axle Bearing Assembly - Each For 3.150" ID Housing End Fits Axles With 1.5635" Bearing Area
AirHeart / Kelsey Hayes / Wilwood Brake Pad For Older 1 Piston Calipers With Round Pads
Ball Bearing Pinion Support Kit For Use With 35 Spline Pro Gear
Strange S-Series Steel Spool For Ford 9" with 31 Spline Axles
9" Ford Female Rear End Coupler Fits Ford 9" 35 Spline Pinion Gear and Solid 35 Spline Driveshafts
Strange Chrome Moly 1350 Series Yoke Fits Ford 9" Rear End with 28 Spline Pinion Gear
.438" Spacer Washer For 5/8 Stud Kits
Aluminum Lug Nut
11/16"-18 Threads
$15.00
For Strange 12 1/4″ Live Axle
• 7075-T6 aluminum
• Black anodized
• .850″ overall height
• 11/16″-18 thread
• Integral steel washer
• 1.302″ O.D. at washer
• 1 1/6″ wrench size
• Sold as each
Recommended Torque
175 ft lbs with Anti-Seize® coated threads
For Strange 10 1/2″ Live Axle – L7010NX
Description
11/16″-18 Aluminum Lug Nut
Related products
Recently viewed products
Cart Summary
-
Housing Ends Symmetrical - For 3.150" OD Bearing
1 × $160.00
-
Axle Bearing With Locking Collar - Each For 3.150" ID Housing End Fits Axles With 1.532" Bearing Area
1 × $55.00
-
Strange 1350 Series Transmission Yoke Mopar 30 Spline - Severe Duty Chrome Moly
1 × $185.00
-
Hyperco Springs 10" x 2 1/2" I.D. - 350 Lbs
1 × $172.00
-
Ford 9" Ring Gear Bolts 7/16" For Clutch Style Differentials
1 × $12.00
-
Conversion U-Joint 1310 Series To 1350 Series
1 × $45.00
-
Strange Ultra Case and Support Package 3.812" Bore Case & Tapered Bearing Support With Installation Kit For 9" or 9 1/2" 35 Spline Pro Gears
1 × $1,660.00
-
Dana 60 Internal Bearing Kit Fits OEM Dana 60 Only
1 × $150.00
-
Pinion Support Bearing Kit For 35 Spline Pinion
1 × $120.00
-
Strange Ultra Case and Support Package 3.250" Bore Case & Taper / Ball Bearing Support With Installation Kit For 9" or 9 1/2" 35 Spline Pro Gears
1 × $1,695.00
-
Rear Pinion Bearing Fits Strange Ultra & Billet Cases With Tapered Bearing Support and 28 or 35 Spline Pinion Gear
1 × $55.00
-
Ford 9" 3.60 Pro Gear with 35 Spline Pinion Richmond Gear - Produced in Italy
1 × $870.00
-
GM 8.4 Corvette 3.36 Gear Set Richmond Gear - Produced in Italy
1 × $490.00
-
Strange Dual Remote Reservoir
1 × $164.00
-
Hyperco Springs 12" x 2 1/2" ID - 85 Lbs
1 × $172.00
-
1986-2014 Ford 8.8 Basic Installation Kit Bearings & Races Are Not Included
1 × $34.00
-
Strange 2 Pc 1350 Series Transmission Yoke GM 27 Spline - Severe Duty Chrome Moly For Roller Bearing Extension Housing
1 × $275.00
-
Ford 9" Pinion Seal For Ball Bearing Support Using 35 Spline Pro Gear
1 × $18.00
-
3 AN With 1/8" NPT Tee-On-Run Fitting
1 × $13.00
-
1 Magnet Pick-Up Collar For Strange 9" Ford Premium 28 Spline Yokes
1 × $65.00
-
Mopar 1/2" Press-In Wheel Studs
1/2"-20 With .673" Knurl - 10 Pcs 1 × $26.00 -
Strange 5/8"-18 x 3" Sleeve Style Stud Kit
Includes .875" Wide Sleeves, Nuts, & .438" Thick Washers 1 × $115.00 -
Axle Bearing With Locking Collar - Each For Small Ford 2.835" ID Housing End Fits Axles With 1.5635" Bearing Area
1 × $55.00
-
Caliper O-Ring Kit For 1995 & Older Strange Two Piston Caliper
1 × $5.00
-
Strange HD Pro Aluminum Case Kit - 3.062" Bore With Taper/Ball Bearing Pinion Support
1 × $925.00
-
Strange Evolution 1 Dynamic Drive Mount Front Brake Kit For Strange Aluminum Struts & Spindle Mount Wheels Evolution S Rotors, Single Piston Evolution 1 Calipers & DTC-30 Semi Metallic Pads
1 × $1,095.00
-
Single Adjustable Rear Coil-Over Shock 1982-2002 Camaro, Firebird, & Trans Am - Spring Sold Separately
1 × $250.00
-
Ford 9" 4.57 Pro Gear with 35 Spline Pinion Richmond Gear - Produced in Italy
1 × $949.00
-
Dana 60 Aluminum Main Caps Includes Bolts - Machining Required
1 × $120.00
-
Mopar 8 3/4" 3.91 Standard Gear - 489 Case Motive Performance Gear - Produced in Italy
1 × $430.00
-
1986-2014 Ford 8.8 Complete Installation Kit Will Not Fit 2013-2014 Shelby GT500 / GT Track Pack
1 × $98.00
-
Mopar 8 3/4" 4.56 Standard Gear For 742 Case & 10 Spline Yoke Richmond Gear - Produced in Italy
1 × $418.00
-
Strange Pro II M/D Front Brake Kit Strange Aluminum Struts - 4 1/2" BC 2 Pc Rotors, 2 Piston Calipers & Semi Metallic Pads
1 × $895.00
-
Rear Bearing Spacer Washer
1 × $8.00
-
Spring Seat Adjuster Wrench For Strange Shocks & Struts
1 × $16.00
-
Dual Master Cylinder - 1.032" Bore Includes Dust Boot, Pushrod, & Fittings
1 × $89.00
-
Ford 9" 4.11 Standard Gear Set Motive Performance Gear - Produced in Italy
1 × $370.00
-
GM BOP 8.2 10 Bolt 3.55 Gear For Buick / Oldsmobile / Pontiac Motive Performance Gear - Produced in Italy
1 × $480.00
-
Basic Installation Kit Mopar 8 3/4" - 489 Case Bearings & Races Are Not Included
1 × $58.00
-
Single Adjustable Front Shock Multiple GM Applications
1 × $175.00
-
Timken® Tapered Race Used In Multiple Applications
1 × $10.00
-
Side Bearing Kit Ford 9" with 3.250" Bore Case
1 × $65.00
-
Tapered Axle Bearing Assembly - Each For 3.150" ID Housing End Fits Axles With 1.5635" Bearing Area
1 × $50.00
-
AirHeart / Kelsey Hayes / Wilwood Brake Pad For Older 1 Piston Calipers With Round Pads
1 × $9.00
-
Mopar 8 3/4" 3.73 Standard Gear - 742 Case Motive Performance Gear - Produced in Italy
1 × $485.00
-
Ball Bearing Pinion Support Kit For Use With 35 Spline Pro Gear
1 × $235.00
-
Strange S-Series Steel Spool For Ford 9" with 31 Spline Axles
1 × $179.00
-
9" Ford Female Rear End Coupler Fits Ford 9" 35 Spline Pinion Gear and Solid 35 Spline Driveshafts
1 × $220.00
-
Strange Chrome Moly 1350 Series Yoke Fits Ford 9" Rear End with 28 Spline Pinion Gear
1 × $145.00
-
.438" Spacer Washer For 5/8 Stud Kits
1 × $3.50