ARP 7/16" Ring Gear Bolt Kit For 9" Ford 40 Spline HD Aluminum Spool
1 × $90.00
Pinion Support Bearing Kit For 35 Spline Pinion
1 × $105.00
Axle Bearing With Locking Collar - Each For 3.150" ID Housing End Fits Axles With 1.532" Bearing Area
1 × $50.00
GM 12 Blt Truck 4.10 Standard Gear Set - Thick Richmond Gear - Produced in Italy
1 × $380.00
2014-19 Corvette 3.90 Standard Gear Set Motive V888390 Performance Gear - Produced in Italy
1 × $1,060.00
Double Adjustable Rear Shock 1965-1969 F100 Pick-Up
1 × $295.00
Strange Pro Carbon Rear Brake Kit For 5 1/2" Bolt Circle Fits 2012 and Earlier Strange Floater Kits
1 × $3,295.00
Pro Carbon Caliper Kit With Slotted Pads For Strange 2 Piece Pro Stock Axles
1 × $1,270.00
2014-19 Corvette 4.10 Standard Gear Set Motive V888410 Performance Gear - Produced in Italy
1 × $1,060.00
Dual Master Cylinder - 1.032" Bore Includes Dust Boot, Pushrod, Fittings, Firewall Reinforcing Plates & Hardware
1 × $99.00
Single Master Cylinder Strange Fast Fill Design Without Remote Reservoir
1 × $245.00
Adjustable Pinion Preload Spacer For Many Strange 9" Ford Pinion Supports
1 × $25.00
Strange Brake Pressure Gauge Includes Bleed Screw Adapter Fitting
1 × $45.00
3.812" Billet Case and Support Package With Taper / Ball Bearing Pinion Support For 10" Development 35 Spline Pro Gears
1 × $3,975.00
Ford Super 8.8 4.88 Standard Gear Set Richmond Gear - Produced in Italy
1 × $386.00
Ford 9" 3.89 Pro Gear with 35 Spline Pinion Motive Performance Gear - Produced in Italy
1 × $700.00
Hardened Washer For 1/2" Bolt - .125" Thick
1 × $0.30
GM 7.5 10 Bolt Ring Gear Spacer Adapts 2 Series Carrier to 3 Series Gear
1 × $50.00
GM 12 Blt 3.73 Standard Gear Set US/Strange Gear - Produced in USA
1 × $325.00
Strange HD Pro Aluminum Case Kit - 3.250" Bore With Taper/Ball Bearing Pinion Support
1 × $875.00
Ford 9" 4.86 Standard Gear Set US/Strange Gear - Produced in USA
1 × $300.00
Ford 9" 4.11 Standard Gear Set US/Strange Gear - Produced in USA
1 × $295.00
1997-2013 Corvette 4.10 Gear Set Motive Performance Gear - Produced in Italy
1 × $600.00
Strange HD Pro Aluminum Case Kit - 3.062" Bore With Tapered Bearing Pinion Support
1 × $875.00
Load Bolt Assembly For Strange Billet Case
1 × $39.00
Ford 9" 4.86 Pro Gear with 35 Spline Pinion Richmond Gear - Produced in Italy
1 × $720.00
Strange 4 Piston Directional Caliper Right Hand Side
1 × $170.00
Ford 9" Center Section Gasket
1 × $6.00
Strange Billet 4 Piston Carbon Caliper For 2 Pc Pro Stock Axles & 9"/9 1/2" Live Axle
1 × $385.00
Side Bearing Kit GM 12 Bolt and Ford 8.8"
1 × $45.00
Ford 9" 4.29 Pro Gear with 35 Spline Pinion US/Strange Gear - Produced in USA
1 × $595.00
Dana 60 Installation Kit For OEM Dana 60 Only
1 × $275.00
Ford 8.8 5.71 Standard Gear Set Motive Performance Gear - Produced in Italy
1 × $469.00
Housing Vent
1 × $3.00
GM 12 Bolt Rear Pinion Bearing For Passenger Car Rear Ends
1 × $16.00
Subtotal: $19,123.30
