Menu

94-04 Mustang Alloy Axle & Spool Package
35 Spl Axles, Eliminator Kit, 1/2" Studs & Spool

$760.00

Part Number: P3509F94S

 
Alloy Axles are Optimized for Street & Track
Provides greater torsional strength while retaining flexibility

Spools are Designed For the Track
They are unsafe for street use

For Pure Drag Racing – P2000FM94

Application
1994-2004 Mustang
With OEM housing ends and GT or Cobra disc brakes

Includes

Alloy AxlesA3500
• Forged from modified 1550 premium steel
• Majority of machining performed before heat treat
• Provides consistent material hardness
• Induction hardened to Rc 58-62
• Increases torsional strength while remaining ductile
• Finish machined after heat treat ensures trueness
• Choice of bolt circle
• Forged in the USA
• Designed and machined by Strange Engineering

C-Clip Eliminator Kit – GT brakes A1094 / Cobra brakes A1095
• Billet aluminum caliper mounts
• Accepts OEM disc brakes – Specify GT or Cobra brakes
• Aluminum inner halves
• Tapered bearings ensure long bearing life
• Bearing spacer/reluctor ring adapters
• Locking rings
• Outer seals
• O-rings
• Housing end bolts
• Hardened washers
Reuses OEM caliper mounting bolts

Choice of Press-in or Screw-in Wheel Studs
• Press-in 1/2″-20 studs – A3121
• Screw-in 1/2″-20 studs 2″ long * – A1025
• Screw-in 1/2″-20 studs 3″ long * – A1026

* Length measured from underneath the hex of the stud

Lightweight Steel SpoolD1567
• Forged premium 8620 steel
• Surface hardened to Rc 45-48
• Lightened to maximize strength to weight
• Forged in the USA
• Designed and machined by Strange Engineering

ABS – This Kit Won’t Work With OEM Reluctor Rings
See optional Strange reluctor rings below
Read instructions carefully beforehand as assembly order is crucial

Part Option
Supply pair of Strange reluctor rings – OPAX01

Labor Option
Install eliminator kit – A1008C
Install eliminator kit & studs – A1008SC
Install eliminator kit, studs & reluctor rings – A1008SRC
 

Description

94-04 Mustang 8.8 35 Spline Axle Package with c clip eliminator kit, spool and 1/2″ Studs

To provide greater flexibility, Strange 35 spline alloy axles are CNC precision-machined from premium forged alloy steel and are induction hardened to resist bending loads. When axles are intended for use in street applications, this type of heat treatment is crucial to ensure a strong axle that can be safely utilized in this environment.

We Cut Before Heat Treatment, Not After.

We can not stress enough the importance that Strange Engineering does all of its machine work on the axle splines prior to heat treatment. This allows for consistent heat treat depth, leading to a stronger axle. Be aware that many companies heat-treat the materials before the splines are machined into the axle which causes them to have a shiny appearance.

Strange axles are manufactured with a large bearing area diameter (1.563-inch) for additional strength. The Strange axle shoulder is designed with an extra large radius and utilizes an adaptive ring to minimize stress concentration.

Strange Lightweight Steel Spool is forged in the USA from premium 4140 steel and carries a Limited Lifetime Warranty.

Strange Engineering has led the industry with an innovative focus. During the early 1970s, Strange brought the C-Clip Eliminator to the market.

Under the extreme effects of drag racing, axles that are held in using only a small c-clip can lead to disastrous results. If the c-clip breaks or simply comes off, the wheel and the full axle may come out of the rear housing. This can be a hazard to vehicle occupants and bystanders, alike. By using the Strange 8.8 C-Clip Eliminator Kit you get rid of the C-clips in your rear end and can ensure that the axle remains inside the housing.

The Strange Mustang C-Clip Eliminator Kit helps make the rear axle safer and more durable. The lightweight aluminum housing bolts up to the axle tube with simple modifications. It incorporates low friction bearings that have a reduction in rotational loss. It incorporates Timken® Tapered Bearings that allow for Street or Strip use. This kit can be used with drum brakes and some aftermarket disc brakes.

1994 Mustang c clip eliminator kit with spool
1995 Mustang c clip eliminator kit with spool
1996 Mustang c clip eliminator kit with spool
1997 Mustang c clip eliminator kit with spool
1998 Mustang c clip eliminator kit with spool
1999 Mustang c clip eliminator kit with spool
2000 Mustang c clip eliminator kit with spool
2001 Mustang c clip eliminator kit with spool
2002 Mustang c clip eliminator kit with spool
2003 Mustang c clip eliminator kit with spool
2004 Mustang c clip eliminator kit with spool

You may also like…

  • P2000FM94-Pro Race Axle & Spool Package  For 1994-2004 Mustang 8.8 Rear End  Race Axles, Lightweight Spool, C-Clip Eliminator kit & 1/2" Studs

    94-04 Mustang Drag Race Axle & Spool Pkg 35 Spl Axles, Eliminator Kit, 1/2″ Studs & Spool

    PN : P2000FM94
    $825.00
    Select options
  • S6004LM-Strange Single Adjustable Rear Shock  1994-2004 Mustang - Will Not Fit IRS Cobra

    Strange Single Adjustable Rear Shock 1994-2004 Mustang – Will Not Fit IRS Cobra

    PN : S6004LM
    $95.00
    Add to cart
  • S6005LM-Strange Single Adjustable Front Strut  1994-2004 Mustang

    Strange Single Adjustable Front Strut 1994-2004 Mustang

    PN : S6005LM
    $149.00
    Add to cart
  • A1094E-Special Reluctor Ring - Each  Fits Strange Axle Package With Eliminator Kit  For 1994-2004 Mustang Using ABS

    Special Reluctor Ring – Each Fits Strange Axle Package With Eliminator Kit For 1994-2004 Mustang Using ABS

    PN : A1094E
    $45.00
    Add to cart