Strange Shop Labor Installation of Eliminator Kit Non-ABS

Cart 866
- - × Auburn Pro Series Differential - 3.23 & Up | Fits GM 7.5 10 Bolt Rear Ends With 26 Spline Axles 2 × $545.00
  - × Manual Brake Conversion Kit | For 1979-1993 Mustang 3 × $169.00
  - × Complete Installation Kit | For OEM Dana 60 Rear End 5 × $180.00
  - × GM 8.5 10 Blt 4.56 Standard Gear Set | Richmond Gear - Produced in Italy 1 × $226.00
  - × GM 8.5 10 Blt 3.23 Standard Gear Set | Richmond Gear - Produced in Italy 2 × $272.00
  - × Strange Pro Series Dual Rear Brake Kit | For Mopar Housing Ends - Includes Axle Bearings | With Slotted Rotors, Four Piston Calipers & Hard Metallic Pads 3 × $1,020.00
  - × GM 8.5 10 Blt 3.90 Standard Gear Set | Richmond Gear - Produced in Italy 1 × $226.00
  - × Strange 1/2"-20 x 2" Screw-in Stud Kit 4 × $21.00
  - × Strange Pro Series Dual Rear Brake Kit | For Mopar Housing Ends - Includes Axle Bearings | With Slotted Rotors, Four Piston Calipers & Soft Metallic Pads 4 × $1,020.00
  - × Eaton Truetrac Differential | Fits Dana 60 With 35 Spline Axles - 5 Series 1 × $925.00
  - × Eaton Truetrac Differential | Fits Dana 60 With 35 Spline Axles - 3 Series 3 × $750.00
  - × 9" Ford Tail Bearing Retainer 2 × $3.00
  - × Strange Billet 1350 Series Yoke | For Ford 9" Using 35 Spline Pinion Shaft 5 × $280.00
  - × Strange Billet 1350 Series Yoke | For Ford 9" Using 28 Spline Pinion Shaft 1 × $280.00
  - × Pinion Support Bearing Kit | For Use With 35 Spline Pinion Shaft 3 × $75.00
  - × Side Bearing Kit | Ford 9" with 2.891" Bore Case 2 × $45.00
  - × Side Bearing Kit | Ford 9" with 3.250" Bore Case 1 × $45.00
  - × Chrome Cover | For Chevy 12 Bolt Passenger Cars 6 × $41.00
  - × Complete Installation Kit | For GM 8.5" 10 Bolt With 28 Spline Axles 2 × $94.00
  - × Strange HD 1350 Series Yoke | For Mopar 8 3/4" 10 Spline Using 742 Case 4 × $90.00
  - × Strange Pro Series Lightweight Steel Spool | Fits Ford 9" with 40 Spline Axles | Requires 3.250" Bore Aftermarket Case 2 × $280.00
  - × U-Bolt Kit For 1480 Series Yokes 1 × $25.00
  - × Hyperco Springs | 8" x 2 1/2" ID - 350 Lbs 1 × $130.00
  - × 3 Channel ABS Sensor | Fits Strange F-Body 12 Bolt 1 × $75.00
  - × LPW Ultimate Support Cover | For Chevy 12 Bolt Cars - Accepts Brace Kit 4 × $169.00
  - × Strange Ultra Case and Support Package | 3.812" Bore Case & Taper / Ball Bearing Support | With Installation Kit For 9" or 9 1/2" 28 Spline Pinion Gears 2 × $1,134.00
  - × Single Piston Caliper with 2" Piston | For Strange 10" Front Carbon Brake Kits | Using One Piece Forged or Billet Spindle Mount Wheels 2 × $135.00
  - × Strange Pro Series Rear Brake Kit | For H1147 Ends with 2.500" Brake Offset | With Slotted Rotors, Four Piston Calipers & Hard Metallic Pads 3 × $595.00
  - × Strange Pro Series II Rear Brake Kit | For H1147 Ends with 2.500" Brake Offset | | | With 2 Pc Slotted Rotors, Four Piston Calipers & Hard Metallic Pads 3 × $695.00
  - × Strange Pro Series II Dual Rear Brake Kit | For 1957-1964 Oldsmobile Housing Ends | With 2 Pc Slotted Rotors, Four Piston Calipers & Hard Metallic Pads 7 × $1,120.00
  - × 9" Ford Housing Center | For Use With 3" OD Tubing 1 × $259.00
  - × Strange Pro Series II Rear Brake Kit | For Mopar Housing Ends - Includes Axle Bearings | With 2 Pc Slotted Rotors, Four Piston Calipers & Soft Metallic Pads 5 × $735.00
  - × Spring Seat Bearing Kit | For Strange Aluminum Struts & Coil-Over Shocks 10 × $38.00
  - × Side Bearing Kit | GM 12 Bolt and Ford 8.8" 4 × $40.00
  - × 3 AN Bulkhead Union 4 × $5.00
  - × Spring Seat Adjuster Wrench | For Strange Shocks & Struts 7 × $15.00
  - × Dana 44 Corvette 4.33 Gear | US/Strange Gear - Produced in USA 2 × $324.00
  - × 12 bolt car rear end cover gasket 2 × $9.00
  - × Strange Quick Release Hub | Designed For Grant Steering Wheels 2 × $116.00
  - × Eaton HD Clutch Style Differential | Fits 64-72 Chevy 8.2 10 Bolt Rear Ends 1 × $560.00
  - × Hyperco Springs | 8" x 2 1/2" ID - 250 Lbs 1 × $130.00
  - × Strange Pro Carbon Rear Brake Kit | For 5" Bolt Circle Using 5/8" Studs | Fits Late Big Ford Housing Ends with 2.50" Brake Offset 1 × $2,950.00
  - × Strange Pro Series Rear Brake Kit | For Late | Big Ford Ends with 2.500" Brake Offset | With Slotted Rotors, Four Piston Calipers & Soft | Metallic Pads 5 × $595.00
  - × Braided Stainless Steel Brake Line - 24" | Teflon® lined With Straight 3 AN Fittings 3 × $21.00
  - × Dragster Rear Plumbing Kit | With 3 AN Braided Stainless Steel Lines & Fittings 4 × $92.00
  - × Front Pinion Race | Chevy 12 Bolt, Strange N1917, & OEM Ford Daytona Support 1 × $6.00
  - × Housing Ends | Symmetrical - For 3.150" OD Bearing 2 × $100.00
  - × Computer Pick-Up Sensor Bracket Kit | Fits Strange Billet Case Pinion Support 3 × $30.00
  - × Hyperco Springs | 12" x 2 1/2" ID - 95 Lbs 1 × $130.00
  - × Housing Ends | Big Ford 3 × $95.00
  - × Strange 9" Lightweight Aluminum Case | 3.250" Bore 1 × $380.00
  - × Complete Installation Kit | For 742 Case Using Strange Spool or Auburn Differential 1 × $129.00
  - × Axle Bearing With Locking Collar - Each | For 3.150" ID Housing End | Fits Axles With 1.7735" Bearing Area 6 × $40.00
  - × Side Bearing Kit | Strange S60 | Ford 9" with 3.812" Bore Case 4 × $60.00
  - × Complete Installation Kit | For Mopar 8 3/4" Using 489 Case 1 × $129.00
  - × Housing End | For Strange 2 Piece Pro Stock Axle 1 × $88.00
  - × Housing Ends | Ford 8.8 - For 3.150" Bearing 2 × $95.00
  - × Strange Pro Series II Dual Rear Brake Kit | For 1957-1964 Oldsmobile Housing Ends | With 2 Pc Slotted Rotors, Four Piston Calipers & Soft Metallic Pads 2 × $1,120.00
  - × Spool Bearing Kit | GM 12 Bolt with Strange Aluminum Spool 1 × $229.00
  - × Pinion Support Bearing Kit | For Use With 28 Spline Pinion Shaft 3 × $75.00
  - × Auburn Pro Series Differential - 3.23 & Up | Fits GM 7.5 10 Bolt Rear Ends With 28 Spline Axles 3 × $545.00
  - × 4 Magnet Pick-Up Collar | For Strange 9" Ford Premium 28 Spline Yokes 3 × $60.00
  - × Strange Pro Series Rear Brake Kit | For 3.350" Symmetrical Housing Ends | With Slotted Rotors, Four Piston Calipers & Soft Metallic Pads 2 × $595.00
  - × Dana 60 4.10 Standard Gear | Richmond Gear 1 × $238.00
  - × Strange Pro Series II Dual Rear Brake Kit | | For 3.350" Symmetrical Ends | | | With 2 Pc Slotted Rotors, Four Piston Calipers & Hard Metallic Pads 3 × $1,120.00
  - × 11 1/4" Slotted Steel Rotor | For Floater Kits Produced Before 2013 | With 4 3/4" & 5" Bolt Circles - Left Hand Side 2 × $173.60
  - × Complete Installation Kit | For Chevy 8.2" 10 Bolt | Special For Strange 33 Spline Spool 3 × $94.00
  - × Side Bearing Kit | For OEM Dana 60 6 × $69.00
  - × Dana 60 Internal Bearing Kit | Fits OEM Dana 60 Only 1 × $125.00
  - × Strange Single Adjustable Front Strut | 1994-2004 Mustang 3 × $129.00
  - × Dana 60 3.73 Standard Gear | Made By Spicer 1 × $225.00
  - × 1/2" x 3" Allen Head Stud 7 × $5.50
  - × T-400 male coupler / 32 spl. (long) 4 × $165.00
  - × Strange 1/2"-20 x 3" Screw-in Wheel Stud 4 × $2.06
  - × 9" Ford Female Rear End Coupler | Fits Ford 9" 28 Spline Pinion Gear 2 × $124.00
  - × Brake Pad | Hard Metallic | For Wilwood and JFZ Four Piston Calipers 1 × $20.00
  - × Strange 5/8"-18 x 3" Sleeve Style Stud Kit | Includes .875" Wide Sleeves, Nuts, & .688" Thick Washers 5 × $90.00
  - × 11 1/2" Stainless Steel Rotor | For 2013 & Newer Floater Kits, | Aluminum Pro Mod Rear End - RH Side 2 × $215.00
  - × Installation Wrench | For A1027C Stud Sleeves 1 × $4.32
  - × Axle Bearing Locking Collar | Fits Multiple Strange Eliminator Kits - Each 2 × $4.50
  - × Axle Bearing With Retainer Plate - Each | For Small Ford 2.835" ID Housing End | Fits Axles With 1.5635" Bearing Area 2 × $50.00
  - × 11 1/2" Carbon Brake Rotor | For Strange 9 1/2", 10 1/2", 12", and 12 1/4" Live Axles 1 × $1,150.00
  - × Complete Installation Kit | For Chevy 8.2" 10 Bolt | Using Differential 2 × $94.00
  - × Ultra Lite 35 Spline Steel Spool | For Strange Chevy Drop-Out Center Section 1 × $317.00
  - × Spherical Roller Bearing | For Strange 2 Pc Pro Stock Axles - Each 2 × $245.00
  - ×
    Carbon Brake Pad For 4 Piston Calipers - Slotted at 11 o'clock Fits Strange 11" & 11.5" Carbon Brake Kits
    1 × $175.00
  - × Rear Caliper Mount - RH Side | For Strange 12 Bolt F-Body Rear End | Using 1993-1997 F-Body Factory Disc Brakes 5 × $97.75
  - × 5/8"-18 Flanged Lug Nut 3 × $1.50
  - × Magnetic Drain Plug Assembly 3 × $6.50
  - × Strange 1/2"-20 x 2" Screw-in Wheel Stud 3 × $2.06
  - × GM 7.5 10 Bolt Ring Gear Spacer | Adapts 2 Series Carrier to 3 Series Gear 1 × $45.00
  - × Adjuster Nut Wrench | For S60 Side Bearing Sleeves 1 × $37.00
  - × Side Bearing Kit | GM 8.5 10 Bolt | With 28 Spline Carrier 6 × $45.00
  - × LPW HD Aluminum Support Cover | Fits Chevy 12 Bolt Passenger Cars 2 × $169.00
  - × GM 8.4 Corvette 3.70 Gear Set | Motive Performance Gear - Produced in Italy 1 × $316.00
  - × Dana 60 4.30 Standard Gear | Made By Hoosier Gear 2 × $225.00
  - × Strange Chrome Moly 1480 Series Yoke | For Ford 9" Using 35 Spline Pinion Shaft 3 × $280.00
  - × Braided Stainless Steel Brake Line - 22" | Teflon® lined With Straight 3 AN Fittings 1 × $21.00
  - × Pro Series Rear Brake Kit | For Strange Aluminum Dragster Housing | With Slotted Rotors, Four Piston Calipers & Soft | Metallic Pads 4 × $665.00
  - × Hyperco Springs | 14" x 2 1/2" ID - 300 Lbs 1 × $130.00
  - × ABS Sensor O-ring | For Strange F-Body 12 Bolt Using 3 Channel System 2 × $0.25
  - × Dana 44 Corvette 4.11 Gear | US/Strange Gear - Produced in USA 2 × $324.00
  - × Auburn Pro Series Differential | Fits 8.8 Ford With 28 Spline Axles 1 × $545.00
  - × Double Adjustable Coil-Over Strut | 1982-1992 Camaro - Drag Race Only 1 × $499.00
  - × Master Cylinder Adapter Fitting | 9/16"-20 Inverted Flare to 3 AN 4 × $9.00
  - × Dana 60 4.56 Pro Gear | Motive Performance Gear - Produced in Italy 1 × $371.00
  - × Strange S-Series 9" Case | Nodular Iron - 3.062" Bore 2 × $249.00
  - × Dana 60 4.30 Pro Gear | US/Strange Gear - Produced in USA 2 × $358.00
  - × 5/8" Stud Kit with .875" Wide Shank | Includes Lug Nuts & .438" Thick Washers | For Strange Two Piece Pro Stock Axles 3 × $90.00
  - × Low Friction Double Row Ball Bearing | For Strange 2 Pc Pro Stock Axles - Each 1 × $106.00
  - × LPW Ultimate Support Cover | For GM 7.5 / 7.625 10 Bolt - Accepts Brace Kit 3 × $169.00
  - × GM 8.5 10 Bolt Aluminum Main Caps | Includes Bolts - Machining Required 2 × $88.00
  - × Ford 9" Center Section Gasket 1 × $6.00
  - × Strange Aluminum Coil-Over Shock | Honda Front Double Adjustable 1 × $294.00
  - × Complete Installation Kit | For GM 8.5" 10 Bolt With 30 or 33 Spline Axles 3 × $94.00
  - × Basic Installation Kit | For GM 8.5" 10 Bolt | Bearings & Races Not Included 3 × $32.00
  - × Strange Ultra Case and Support Package | 3.250" Bore Case & Taper / Ball Bearing Support | With Installation Kit For 9" or 9 1/2" 28 Spline Pro Gears 1 × $1,134.00
  - × 4 Magnet Pick-Up Collar | For Strange Chrome Moly Yokes | Will Not Fit Ford 9" Yokes 1 × $60.00
  - × Chevy 12 Blt Ring Gear Bolt Kit 4 × $9.00
  - × Double Adjustable Coil-Over Strut | 1987-2004 Mustang With V8 Spindles - Drag Race Only 4 × $499.00
  - × 5/8" Stud Kit with .775" Wide Shank | Includes Lug Nuts & .250" Thick Washers 4 × $90.00
  - × 3/16" Brake Line - 25 Ft Coil 3 × $36.00
  - × Eaton HD Clutch Style Differential - 2.73 & Up | Fits Chevy 8.5 10 Bolt Rear Ends With 30 Spline Axles 3 × $575.00
  - × Eaton HD Clutch Style Differential - 2.73 & Up | Fits Chevy 8.5 10 Bolt Rear Ends With 28 Spline Axles 2 × $510.00
  - × 5/8" Stud Kit with 1.187" Wide Shank | Includes Lug Nuts & .250" Thick Washers 2 × $90.00
  - × .250" Spacer Washer For 5/8 Stud Kits 1 × $1.50
  - × Strange Aluminum Coil-Over Shock | Honda Rear Double Adjustable 1 × $294.00
  - × Strange Pro Series Rear Brake Kit | For H1143 Ends with 2.832" Brake Offset | With Slotted Rotors, Four Piston Calipers & Hard Metallic Pads 1 × $595.00
  - × Pro Series Rear Brake Kit | For Strange Aluminum Dragster Housing | With Slotted Rotors, Four Piston Calipers & Hard Metallic Pads 4 × $665.00
  - × GM BOP 8.2 10 Bolt 4.11 Gear | For Buick / Oldsmobile / Pontiac | Motive Performance Gear - Produced in Italy 2 × $323.00
  - × 11" Carbon Rotor | For Strange Front and Rear Carbon Brake Kits 1 × $795.00
  - × Strange Pro Series II Rear Brake Kit | For Strange Aluminum Dragster Housing | With | 2 Pc Slotted Rotors, Four Piston Calipers & Hard | Metallic Pads 4 × $695.00
  - × Strange Polished Aluminum Pinion Support | For Street, Street / Strip, and Track Use 1 × $187.00
  - × Pro Series Rear Brake Kit | For Strange Aluminum Dragster Housing | With Slotted Rotors, Four Piston Calipers & Hard Metallic Pads 6 × $595.00
  - × Axle Bearing With Locking Collar - Each | For 3.150" ID Housing End | Fits Axles With 1.5635" Bearing Area 4 × $40.00
  - × Strange Pro Series Rear Brake Kit | For H1147 Ends with 2.500" Brake Offset | With Slotted Rotors, Four Piston Calipers & Soft Metallic Pads 3 × $595.00
  - × Strange Pro Series II Rear Brake Kit | For H1147 Ends with 2.500" Brake Offset | | With 2 Pc Slotted Rotors, Four Piston Calipers & Soft Metallic Pads 3 × $695.00
  - × Strange Pro Series II Rear Brake Kit | For Strange Aluminum Dragster Housing | With | 2 Pc Slotted Rotors, Four Piston Calipers & Soft | Metallic Pads 7 × $695.00
  - × Strange Ford 8.8 31 Spline C-Clip Axles | For 1999-2004 Mustang - Pair 2 × $250.00
  - × Strange 1/2"-20 x 3" Screw-in Stud Kit 4 × $21.00
  - × 3 AN x 1/8" NPT 45° Fitting 1 × $8.00
  - × Pro Touring Reluctor Ring | For 05-10 or 11-14 Mustang ABS Systems 1 × $54.00
  - × Strange Pro Series Rear Brake Kit | For 1957-1964 Olds Housing Ends | With Slotted Rotors, Four Piston Calipers & Hard Metallic Pads 5 × $595.00
  - × 3 AN With 1/8" NPT Tee-On-Run Fitting 1 × $13.00
  - × Strange Pro Series Rear Brake Kit | For Late Big Ford Ends with 2.500" Brake Offset | With Slotted Rotors, Four Piston Calipers & Hard Metallic Pads 2 × $595.00
  - × Double Adjustable Coil-Over Strut | 2010-2014 Camaro - Drag Race Only 4 × $499.00
  - × Ford Mustang OEM Reluctor Ring - Each | For 1994-2004 C-Clip Style Axle 2 × $56.00
  - × Front Pinion Bearing | For OEM Dana 60 & Strange S60 2 × $21.00
  - × Strange Pro Carbon Rear Brake Kit | For 4 3/4" Bolt Circle Using 5/8" Studs | Fits 3.150" Symmetrical Ends with 2.832" Brake Offset 1 × $2,950.00
  - × Side Bearing Kit | Ford 9" with 3.062" Bore Case 4 × $45.00
  - × Strange Brake Pressure Gauge | Includes Bleed Screw Adapter Fitting 3 × $40.00
  - × Front Carbon Brake Kit - 2" Piston | For Strange Ultra Struts | Fits One Piece Billet or Forged Spindle Mount Wheels 1 × $2,950.00
  - × GM 12 Blt 3.73 Standard Gear Set | US/Strange Gear - Produced in USA 1 × $219.00
  - × Dana 60 4.10 Pro Gear | Motive Performance Gear - Produced in Italy 1 × $369.00
  - × Dana 60 3.54 Standard Gear | Made By Spicer 2 × $330.00
  - × Pinion Seal Kit | For OEM Dana 60 & Strange S60 2 × $10.00
  - × Strange Caliper Kit - 1 3/4" Piston | With Slider Assembly & Soft Metallic Pads 2 × $255.00
  - × Weld Tab For Bulkhead Fitting 2 × $3.00
  - × Front Pinion Race | For OEM Dana 60 & Strange S60 2 × $18.00
  - × 4 Magnet Pick-Up Collar | For Strange 9" Ford 35 Spline Yokes 2 × $60.00
  - × Strange Aluminum Cover | For Dana 60 / Strange S60 3 × $95.00
  - × Retaining Nut For Bulkhead Fitting 1 × $1.00
  - × 9" Ford Female Rear End Coupler | Fits Ford 9" 35 Spline Pinion Gear and Solid 35 Spline Driveshafts 2 × $159.00
  - × 5/8"-18 x .875" Stud Sleeve 4 × $2.40
  - × Strange Billet Caliper - Red | For Pro II Stainless Steel Brake Kits 1 × $199.00
  - × Strange 1/2"-20 x 2 1/2" Front Stud Kit | With Tapered Allen Head Design 3 × $20.54
  - × 3 AN Tee-On-Run Bulkhead Fitting 1 × $15.00
  - × Single Adjustable Rear Coil-Over Shock | 1982-2002 Camaro, Firebird, & Trans Am - Spring Sold Separately 1 × $199.00
  - × GM 12 Blt 3.42 Standard Gear Set | US/Strange Gear - Produced in USA 1 × $219.00
  - × LPW Ultimate Support Cover | For Dana 60 / Strange S60 - Accepts Brace Kit 5 × $169.00
  - × 8 Magnet Pick-Up Collar | For Strange 9" Ford Premium 28 Spline Yokes 2 × $129.00
  - × Eaton Detroit Locker Differential | Fits 8.8 Ford With 31 Spline Axles 1 × $745.00
  - × Complete Installation Kit | For Strange S60 Rear End 4 × $180.00
  - × GM 12 Bolt Car Aluminum Main Caps | Includes Bolts - Machining Required 7 × $88.00
  - × 12-blt female rear end coupler / 30 spl. 1 × $124.00
  - × Carbon Brake Pad | For 6 Piston Calipers | Fits Strange 11" & 11.5" Carbon Brake Kits 1 × $154.00
  - × Strange HD 1350 Series Yoke | For Ford 9" Using 28 Spline Pinion Shaft | Special for N2322 Pinion Support 2 × $89.50
  - × Carbon Brake Pad Heat Shield | .060" Thick Stainless Steel - Each 2 × $9.00
  - × Strange Pro Series II Rear Brake Kit | For Big Ford Housing Ends | With 2 Pc Slotted Rotors, Four Piston Calipers & Hard Metallic Pads 2 × $695.00
  - × Strange Pro Carbon Completion Kit | Carbon Rotors & Pads, Ultra Calipers, & 5" BC Hats | Caliper Mounts Are Not Included 1 × $2,850.00
  - × Strange Pro Carbon Rear Brake Kit | For 5" Bolt Circle Using 5/8" Studs | Fits 3.150" Symmetrical Ends with 2.832" Brake Offset 1 × $2,950.00
  - × Hoosier Clutch Style Differential | Fits 9" Ford With 31 Spline Axles 1 × $389.00
  - × Strange Single Fast Fill Master Cylinder | Includes Remote Mount Reservoir 2 × $210.00
  - × Strange GM 12 Bolt 30 Spline C-Clip Axles | For 1967-1969 Camaro & 1964-1967 Chevelle - Pair 1 × $250.00
  - × 2 pc. Powerglide male coupler / 27 spl. (long) 1 × $175.00
  - × Dana 60 4.88 Pro Gear | Motive Performance Gear - Produced in Italy 1 × $371.00
  - × 3 AN Coupling Nut Sleeve 1 × $1.00
  - × Drag Race Door Car Front Plumbing Kit | With 3 AN Braided Stainless Steel Lines & Fittings 2 × $88.00
  - × Spicer Trac-Lok Clutch Style Differential | Fits Dana 60 With 35 Spline Axles - 3 Series 3 × $425.00
  - × Carbon Rear Brake Kit | For 4 3/4" and 5" Bolt Circles | Fits Strange 2012 and Earlier Floater Kits 1 × $3,250.00
  - × Strange 11.250" Front Brake Rotor | Tapered Design - Left Hand Side 1 × $145.00
  - × GM 12 Bolt Rear Pinion Bearing | For Passenger Car Rear Ends 3 × $16.00
  - × LPW Axle Tube Brace Kit | Fits LPW Ultimate Cover For Dana 60 4 × $120.00
  - × Strange Pro Series II Rear Brake Kit | For 1957-1964 Oldsmobile Housing Ends | With 2 Pc Slotted Rotors, Four Piston Calipers & Hard Metallic Pads 2 × $695.00
  - × 35 spline sleeve 2 × $86.00
  - × 5/8" Stud Kit with .875" Wide Shank | Includes Lug Nuts & .438" Thick Washers 1 × $90.00
  - × Strange HD 1350 Series Yoke | For Dana 60 Using 29 Spline Pinion Shaft 3 × $90.00
  - × GM 12 Bolt Pinion Bearing Preload Assembly 5 × $32.00
  - × Braided Stainless Steel Brake Line - 16" | Teflon® lined With Straight & 90° 3 AN Fittings 7 × $18.00
  - × Koni Aluminum Coil-Over Shock | Double Adjustable with 5" Stroke 1 × $450.00
  - × Dana 60 5.38 Pro Gear | US/Strange Gear - Produced in USA 2 × $556.00
  - × GM BOP 8.2 10 Bolt 3.90 Gear | For Buick / Oldsmobile / Pontiac | Motive Performance Gear - Produced in Italy 1 × $326.00
  - × Hyperco Springs | 14" x 2 1/2" ID - 110 Lbs 1 × $130.00
  - × Ultra Case and Support Package | 4" Bore For Strange L6000 Live Axle - With Coupler Cover | Includes Installation Kit For 9" or 9 1/2" 35 Spline Pro Gears 1 × $1,237.00
  - × Strange Single Adjustable Rear Shock | 1979-1993 Mustang 1 × $80.00
  - × Hyperco Springs | 12" x 2 1/2" ID - 150 Lbs 1 × $130.00
  - × Dana 60 6.17 Pro Gear | Richmond Gear - Produced in Italy 1 × $408.00
  - × Tapered Axle Bearing Assembly - Each | For 3.150" ID Housing End | Fits Axles With 1.5635" Bearing Area 1 × $35.00
  - × Double Adjustable Rear Shock | 1967-1969 Camaro & Firebird | With Mono Leaf Springs & Staggered Shocks 4 × $260.00
  - × Pinion Support Bearing Kit | For Daytona Style Supports 3 × $42.00
  - × Tail Bearing Retainer Plate Kit | For HD Pro, Ultra, & Billet Cases 1 × $12.00
  - × Axle Bearing With Locking Collar - Each | For 3.150" ID Housing End | Fits Axles With 1.532" Bearing Area 4 × $40.00
  - × Pro Carbon Caliper Kit | With Carbon Brake Pads | For Strange 9" / 9 1/2" Live Axles 1 × $1,270.00
  - × 3.812" Billet Case and Support Package | With Tapered Bearing Pinion Support | For 10" Development 35 Spline Pro Gears 1 × $3,400.00
  - × Axle Bearing With Locking Collar - Each | For Small Ford 2.835" ID Housing End | Fits Axles With 1.5635" Bearing Area 1 × $35.00
  - × Powerglide male coupler / 27 spl / long 2 × $155.00
  - × Strange Aluminum 1350 Series Yoke | For Ford 9" Using 28 Spline Pinion Shaft 6 × $250.00
  - × Strange HD Pro Aluminum Case Kit | 3.062" Bore With Tapered Bearing Support 3 × $684.00
  - × Pinion Support Spacer Kit | For Ultra Case Using 10" Pro Gear 1 × $61.00
  - × Pro Carbon Caliper Kit | With Slotted Carbon Brake Pads | For Strange 2 Piece Pro Stock Axles 2 × $1,270.00
  - × Single Piston Caliper with 1 3/4" Piston | For Strange 10" Front Steel Brake Kits 1 × $85.00
  - × 12 Bolt Drop-Out Aluminum Case | | 3.062" Bore - Fits Ford 9" Housing 1 × $627.00
  - × Dana 60 Rear End Cover Gasket | Fel Pro High Performance 3 × $18.00
  - ×