Strange Driveshaft Speed Sensor Kit For Strange Ultra Case Taper/Ball Pinion Support Using 35 Spline Yoke or Coupler
Front Pinion Bearing For Strange N1922 & N2322 Pinion Supports Using 35 Spline Pinion Gear
Solid Mounting Plate For Strange Aluminum Dragster / Altered Housing
Mopar 8 3/4" 4.57 Standard Gear - 489 Case Richmond Gear - Produced in Italy
Front Pinion Bearing Chevy 12 Bolt, Strange N1917, & OEM Ford Daytona Supports
Strange HD 1350 Series Yoke Fits Ford 8.8 Rear Ends
12 bolt car rear end cover gasket
9" Ford Male Rear End Coupler Fits Ford 9" 35 Spline Pinion Gear and Solid 35 Spline Driveshafts
Ford 9" 5.83 Standard Gear Set Motive Performance Gear - Produced in Italy
Tapered Bearing Spacer Ring For Moser #7900FM Housing End
Hyperco Springs 14" x 2 1/2" ID - 150 Lbs
Eaton Truetrac Differential - 3 Series Fits Chevy 12 Bolt Passenger Car With 30 Spline Axles
Strange 1/2"-20 x 2" Screw-in Wheel Stud
Strange Ultra Case and Support Package 3.250" Bore Case & Taper / Ball Bearing Support With Installation Kit For 9" or 9 1/2" 28 Spline Pro Gears
Dual Master Cylinder - 1.125" Bore Includes Dust Boot, Pushrod, & Fittings
Dual Master Cylinder - 1.125" Bore Includes Dust Boot, Pushrod, Fittings, Firewall Reinforcing Plates & Hardware
DRM-40 Metallic Brake Pad For Strange Four Piston Caliper
Basic Installation Kit For Ford 8" Rear End Bearings & Races Are Not Included
Dana 60 Pinion Depth Shims, Preload Shims, Cover Gasket, and Pinion Nut
GM 12 Blt 4.11 Pro Gear Set Richmond Gear - Produced in Italy
S60 Bare Casting With Pinion Snubber Provision
DRM-35 Metallic Brake Pad For Strange Four Piston Caliper
Double Adjustable Rear Coil-Over Shock 1982-2002 Camaro / Firebird / Trans Am - Spring Sold Separately
Tail Bearing Retainer Plate Kit For HD Pro, Ultra, & Billet Cases
5/8" Stud Kit - .875" Shoulder Length
Pinion Support O-Ring For Ultra Case and Billet Case Supports
3 AN x 1/8" NPT Straight Fitting
- You cannot add "11 1/2" Slotted Steel Rotor | For Strange 10 1/2" Live Axle | Includes 9/9.5" Live Axle Produced After 2012" to the cart because the product is out of stock.
Strange 2 Piece 1350 Series Transmission Yoke
Severe Duty Chrome Moly With Billet Cap Kit
For GM TH400 With Roller Bearing Extension Housing
$315.00
Application
TH400 with with roller bearing extension housing
Body
• Billet 4340 chrome moly steel
• Maximum strength for extreme applications
• Additional material in critical areas
• Broached for 32 spline output shaft
• Induction hardened for use with roller bearing
• Black oxide finish for corrosion resistance
• Designed & machined by Strange Engineering
• Steel produced in USA
Caps
• Heat treated billet chrome moly steel straps
• ETD 150 steel studs
• 12 point ARP® distorted thread locking nuts
Accepts 1350 Series U-Joint
• Larger u-joint than ever offered by OEM
• 1350 series non-crossdrilled u-joint available – U1641
Related
For extension housing with bushing – U1678
Description
Two piece GM 32 spline transmission yoke / for roller bearing housing
Related products
-
Strange 2 Piece 1350 Series Transmission Yoke Severe Duty Chrome Moly With Billet Cap Kit For Powerglide With Roller Bearing Extension Housing
$315.00 Add to cart -
Strange 1350 Series Transmission Yoke Ford 28 Spline – Heavy Duty Nodular Iron
$115.00 Add to cart -
Strange 1480 Series Transmission Yoke G-Force & Liberty 32 Spline – Severe Duty Chrome Moly
$295.00 Add to cart -
Strange 1350 Series Transmission Yoke Lenco 16 Spline – Severe Duty Chrome Moly
$200.00 Add to cart
You may also like…
-
Strange Chrome Moly 1350 Series Yoke Fits Ford 9″ Rear End with 35 Spline Pinion Gear
$145.00 Add to cart -
Strange Chrome Moly 1350 Series Yoke Fits GM 12 Bolt Rear Ends
$155.00 Add to cart -
Strange Chrome Moly 1350 Series Yoke Fits 1955-1964 Oldsmobile & Pontiac
$150.00 Add to cart -
Strange Chrome Moly 1350 Series Yoke Fits Ford 9″ Rear End with 28 Spline Pinion Gear
$145.00 Add to cart
Recently viewed products
-
Strange Eye Mount Aluminum Strut Package Single Adjustable With M/D Brake Kit For Hub Mount Wheels
$2,170.00 Select options -
HD Pro Aluminum Center Section With L/W Steel Spool, Standard Gear & Female Coupler
$2,005.00 Select options -
Wilwood 11″ Street / Street & Track Rear Brake Kit Fits Late Big Ford Housing Ends
$875.00 Add to cart -
Ford 8.8 5.71 Standard Gear Set Motive Performance Gear – Produced in Italy
$405.00 Add to cart
Cart Summary
-
Strange Driveshaft Speed Sensor Kit For Strange Ultra Case Taper/Ball Pinion Support Using 35 Spline Yoke or Coupler
1 × $295.00
-
Front Pinion Bearing For Strange N1922 & N2322 Pinion Supports Using 35 Spline Pinion Gear
1 × $35.00
-
Solid Mounting Plate For Strange Aluminum Dragster / Altered Housing
1 × $138.00
-
Mopar 8 3/4" 4.57 Standard Gear - 489 Case Richmond Gear - Produced in Italy
1 × $550.00
-
Front Pinion Bearing Chevy 12 Bolt, Strange N1917, & OEM Ford Daytona Supports
1 × $14.00
-
Strange HD 1350 Series Yoke Fits Ford 8.8 Rear Ends
1 × $95.00
-
12 bolt car rear end cover gasket
1 × $9.00
-
Front Pinion Bearing For Strange N1922 & N2322 Pinion Supports Using 28 Spline Pinion Gear
1 × $30.00
-
9" Ford Male Rear End Coupler Fits Ford 9" 35 Spline Pinion Gear and Solid 35 Spline Driveshafts
1 × $210.00
-
Ford 9" 5.83 Standard Gear Set Motive Performance Gear - Produced in Italy
1 × $370.00
-
Tapered Bearing Spacer Ring For Moser #7900FM Housing End
1 × $19.25
-
Hyperco Springs 14" x 2 1/2" ID - 150 Lbs
1 × $180.00
-
Eaton Truetrac Differential - 3 Series Fits Chevy 12 Bolt Passenger Car With 30 Spline Axles
1 × $696.00
-
Strange 1/2"-20 x 2" Screw-in Wheel Stud
2 × $4.00
-
Strange Ultra Case and Support Package 3.250" Bore Case & Taper / Ball Bearing Support With Installation Kit For 9" or 9 1/2" 28 Spline Pro Gears
1 × $1,695.00
-
Dual Master Cylinder - 1.125" Bore Includes Dust Boot, Pushrod, & Fittings
1 × $100.00
-
Dual Master Cylinder - 1.125" Bore Includes Dust Boot, Pushrod, Fittings, Firewall Reinforcing Plates & Hardware
1 × $110.00
-
DRM-40 Metallic Brake Pad For Strange Four Piston Caliper
1 × $25.00
-
Basic Installation Kit For Ford 8" Rear End Bearings & Races Are Not Included
1 × $35.00
-
Dana 60 Pinion Depth Shims, Preload Shims, Cover Gasket, and Pinion Nut
1 × $90.00
-
Ford 9" 4.86 Standard Gear Set Motive Performance Gear - Produced in Italy
1 × $370.00
-
GM 12 Blt 4.11 Pro Gear Set Richmond Gear - Produced in Italy
1 × $675.00
-
S60 Bare Casting With Pinion Snubber Provision
1 × $595.00
-
DRM-35 Metallic Brake Pad For Strange Four Piston Caliper
1 × $25.00
-
GM 12 Blt 4.88 Standard Gear Richmond Gear - Produced in Italy
1 × $415.00
-
Double Adjustable Rear Coil-Over Shock 1982-2002 Camaro / Firebird / Trans Am - Spring Sold Separately
1 × $325.00
-
GM 12 Blt 4.33 Pro Gear Set Richmond Gear - Produced in Italy
1 × $675.00
-
Tail Bearing Retainer Plate Kit For HD Pro, Ultra, & Billet Cases
1 × $12.00
-
5/8" Stud Kit - .875" Shoulder Length
Includes Lug Nuts & .688" Thick Washers 1 × $115.00 -
Pinion Support O-Ring For Ultra Case and Billet Case Supports
1 × $3.00
-
3 AN x 1/8" NPT Straight Fitting
1 × $2.00