Strange HD Ford 9″ Bolt-in Housing – No Housing Ends
Perfect Base For Creating Pro Touring Floater Housing
1979-2004 Mustang
OEM .625″ pinion offset to the passenger side
Custom widths available at no additional charge
Information Needed
Tube to tube width
Center Housing
• Constructed from .141″ mild steel
• Heavy duty .282″ thick face plate
• Internal gussets provide rigidity and support axle tubes
• Slots allow exceptional weld contact of housing to tubes
• Extended cover provides clearance for 9″ & 9 1/2″ gear sets
Fill & Drain plugs
• Facilitate fluid changes
• Allows for inspection of ring gear
• Small fill eliminates clearance issues
Tubing
• DOM 1026 steel
• 3.250″ OD x .250″ wall thickness
1979-2004 Mustang Mounts
• Strange HD upper control arm mounts
• Upper mounts raised .500″ for additional traction
• Lower control arm mounts with multiple bolt hole locations
• Provides greater chassis tuning capabilities
Adjustable Shock Mounts
• 6 positions with .375″ increments
• 1.875″ of adjustment
• Allows ride height adjustments without affecting stroke
Professionally Welded
• Jig welded to ensure proper alignment
• Tubes internally & externally welded to housing
• Provides maximum support & rigidity
• Exceptional weld quality
Related
Pro Touring floater kit – F5010
Labor to install spindles – H1130SF
Cambered Pro Touring floater kit – F5012
Labor to install cambered spindles – H1130CSF
Late Big Ford housing ends – H1137
Mustang 8.8 housing ends – H1138
Gasket – H1111S
See Our Full Line of Center Sections
Available for Drag Race Only, Street / Track, and Performance Street Vehicles