Master Cylinder Adapter Fitting 1/2"-20 Inverted Flare to 3 AN
1 × $10.00
Dana 60 Aluminum Main Caps Includes Bolts - Machining Required
1 × $120.00
Ford 9" 4.11 Pro Gear with 35 Spline Pinion Motive Performance Gear - Produced in Italy
1 × $700.00
Ford 9" 3.89 Pro Gear with 35 Spline Pinion US/Strange Gear - Produced in USA
1 × $620.00
Ford 9" 4.57 Pro Gear with 35 Spline Pinion Motive Performance Gear - Produced in Italy
1 × $700.00
Strange 10" Steel Rotor - Left Hand Side Fits Spindle Mount Wheels Requiring 1" Offset
1 × $155.00
AirHeart / Kelsey Hayes / Wilwood Brake Pad For Older 1 Piston Calipers With Round Pads
1 × $9.00
GM 12 Blt Truck 3.42 Standard Gear Set Richmond Gear - Produced in Italy
1 × $380.00
GM 8.5 10 Blt 5.38 Standard Gear Set Richmond Gear - Produced in Italy
1 × $399.00
Hardened Washer For 5/8" Bolt - .0625" Thick
2 × $0.36
LPW Axle Tube Brace Kit Fits LPW Ultimate Cover For Dana 60
3 × $135.00
8 Magnet Pick-Up Collar For Strange Chrome Moly Yokes Will Not Fit Ford 9" Yokes
1 × $140.00
Strange Honda Front Coil-Over Shock - Double Adjustable For 1989-1991 CRX & 1989-2001 Civic
1 × $325.00
DTC-30 Semi-Metallic Brake Pad For Strange Four Piston Caliper
1 × $25.00
Pinion Seal For GM 12 Bolt Rear End
1 × $11.00
LPW Ultimate Support Cover Fits GM 8.2" & 8.5" 10 Bolts - Accepts Brace Kit
1 × $215.00
Ford 9" Ring Gear Bolts 7/16" For Strange Steel Spools
1 × $10.00
Rear Pinion Race For OEM Dana 60 & Strange S60
1 × $16.00
Ford 9" 4.11 Pro Gear with 35 Spline Pinion US/Strange Gear - Produced in USA
1 × $595.00
GM 8.2 10 Bolt 4.56 Gear Set Motive Performance Gear - Produced in Italy
1 × $463.00
Ford 9" 4.86 Pro Gear with 35 Spline Pinion US/Strange Gear - Produced in USA
1 × $595.00
Complete Installation Kit For GM 8.5" 10 Bolt With 30 or 33 Spline Axles
1 × $98.00
Ford 9" 3.70 Standard Gear Set US/Strange Gear - Produced in USA
1 × $295.00
GM 12 Blt Truck 4.10 Standard Gear Set - Thick Richmond Gear - Produced in Italy
1 × $380.00
Hyperco Springs 12" x 2 1/2" ID - 95 Lbs
1 × $156.00
GM 12 Blt 5.38 Pro Gear Set US/Strange Gear - Produced in USA
1 × $408.00
5/8" Stud Kit with 1.187" Wide Shank Includes Lug Nuts & .688" Thick Washers
1 × $100.00
GM 12 Blt 4.88 Pro Gear Set Richmond Gear - Produced in Italy
1 × $470.00
Computer Sensor Bracket For Many Strange Pinion Supports
1 × $15.00
Double Adjustable Coil-Over Strut 1987-2004 Mustang With V8 Spindles
1 × $529.00
Double Adjustable Rear Coil-Over Shock 1982-2002 Camaro / Firebird / Trans Am - Spring Sold Separately
1 × $325.00
Basic Installation Kit For GM 12 Bolt Car Bearings & Races Not Included
1 × $35.00
Carbon Brake Conversion Kit Upgrades From Steel to Carbon Brakes For Strange 10 1/2" Live Axle and 2013 & Later 9 / 9 1/2" Top Loader
1 × $3,895.00
Axle Bearing With Retainer Plate - Each For Small Ford 2.835" ID Housing End Fits Axles With 1.5635" Bearing Area
1 × $60.00
Ford 9" 4.86 Standard Gear Set Motive Performance Gear - Produced in Italy
1 × $385.00
Ford 9" 3.25 Standard Gear Set US/Strange Gear - Produced in USA
1 × $299.00
Ford 9" 4.86 Pro Gear with 35 Spline Pinion Motive Performance Gear - Produced in Italy
1 × $700.00
Strange HD Pro Aluminum Case Kit - 3.812" Bore With Taper/Ball Bearing Pinion Support
1 × $875.00
LPW Ultimate Support Cover For GM 12 Bolt Trucks - Accepts Brace Kit
1 × $215.00
T-400 male coupler / 32 spl. (short)
1 × $164.00
Subtotal: $15,297.72
