Strange Billet 4 Piston Black Caliper Kit
With High Temp Metallic Brake Pads


Part Number: B1953

Designed Specifically For Drag Racing

Same Calipers Supplied in Pro II Stainless Steel Brake Kits
Can be used in most other Strange steel brake kits


Four Piston Billet Black CalipersB1900
• Billet aluminum bodies are extremely ridged & reduce weight
• Pistons are machined from billet stainless steel
• Much stiffer than common stamped stainless pistons
• Highly resistant to deflection resulting in a very firm pedal
• All pistons are 1.750″ to provide maximum clamping force
• Black anodized finish

Bolt Kit
• Four 3/8″-24 x 1.127″ NAS bolts
• Four 3/8″ ID .125″ thick washers
• Sixteen 3/8″ ID .025″ thick stainless steel alignment shims

High Temp Metallic Brake PadsB5022
• Provides the highest resistance to brake fade
• Recommended for vehicles going over 150 MPH in the 1/4 mile
• Pad residue on rotor surface greatly reduced over hard pads

Brake Hoses and Lines Are Not Included
Calipers are tapped 1/8″ NPT and supplied with male 3 AN fittings

Use Teflon® tape or liquid on the pipe threads of the fitting
Leave a few threads from the tip uncoated
This will avoid depositing material inside the caliper
Torque fitting to 25 ft lbs

Caliper Kits With Other Pads
Soft metallic pads – B1950
Hard metallic pads – B1955


Strange Four Piston Caliper Kit Billet – High Temp Pads