Hyperco Springs 10" x 2 1/2" ID - 375 Lbs
1 × $156.00
Strange Pro II M/D Front Brake Kit Strange Aluminum Struts - 4 1/2" BC 2 Pc Rotors, 2 Piston Calipers & Semi Metallic Pads
1 × $825.00
Strange Pro Series HD Lightweight Steel Spool Fits Ford 9" with 40 Spline Axles Requires 3.812" Bore Strange Case
1 × $295.00
Strange Pro Series Lightweight Steel Spool Fits Ford 9" with 40 Spline Axles Requires 3.250" Bore Aftermarket Case
1 × $295.00
Strange 4 Piston Billet Caliper Red
1 × $200.00
US Gear Clutch Style Differential Fits 9" Ford With 28 Spline Axles
1 × $410.00
Double Adjustable Coil-Over Strut 1987-2004 Mustang With V8 Spindles
1 × $529.00
S60 Bare Casting With Pinion Snubber Provision
1 × $595.00
Installation Wrench For A1027C Stud Sleeves
1 × $5.00
Pinion Support Bearing Kit For 35 Spline Pinion
2 × $105.00
GM 12 Blt 3.55 Standard Gear Set Motive Performance Gear - Produced in Italy
1 × $350.00
Ford 9" Pinion Seal For Ball Bearing Support Using 28 Spline Pinion Gear
1 × $20.00
GM 12 Blt 5.57 Pro Gear Set Richmond Gear - Produced in Italy
1 × $500.00
Strange 10" Steel Rotor - Left Hand Side For Strange Aluminum Struts Spindle Mount Wheels Requiring 1 1/2" Offset
1 × $155.00
Hyperco Springs 12" x 2 1/2" ID - 200 Lbs
1 × $156.00
Heavy Duty U-Joint 1350 Series
1 × $35.00
Ford 9" 4.11 Pro Gear with 35 Spline Pinion Richmond Gear - Produced in Italy
1 × $720.00
Ford 9" 3.25 Standard Gear Set Motive Performance Gear - Produced in Italy
1 × $346.00
GM 12 Blt Truck 4.56 Standard Gear Set Richmond Gear - Produced in Italy
1 × $370.00
Strange HD Pro Aluminum Case Kit - 3.062" Bore With Tapered Bearing Pinion Support
1 × $875.00
Pinion Seal Kit For OEM Dana 60 & Strange S60
1 × $12.00
Ford 9" 5.67 Pro Gear with 28 Spline Pinion Motive Performance Gear - Produced in Italy
1 × $700.00
9" Ford Tail Bearing Retainer
1 × $3.50
C-Clip Eliminator Kit - For Drag Racing Only For Pro Race Axles With 1.563" Bearing Area Fits Small GM OEM Housing Ends
1 × $210.00
1 Magnet Pick-Up Collar For Strange 9" Ford 35 Spline Yokes
1 × $65.00
Ford 9" 4.86 Pro Gear with 35 Spline Pinion Richmond Gear - Produced in Italy
1 × $720.00
GM 12 Blt 4.33 Pro Gear Set Richmond Gear - Produced in Italy
1 × $520.00
Dana 60 Internal Bearing Kit Fits OEM Dana 60 Only
1 × $130.00
Ford 9" 4.11 Standard Gear Set Motive Performance Gear - Produced in Italy
1 × $377.00
Side Bearing Kit GM 12 Bolt and Ford 8.8"
1 × $45.00
35 spline sleeve
1 × $120.00
Ford 9" 3.89 Standard Gear Set Motive Performance Gear - Produced in Italy
1 × $365.00
Front Pinion Bearing For OEM Dana 60 & Strange S60
1 × $21.00
GM 12 Bolt Rear Pinion Race
1 × $11.00
Subtotal: $10,346.50
