Dana 60 yoke / 1350 / Strange chrome moly

Cart 528
- - × Single Adjustable Rear Coil-Over Shock | 2010-2015 Camaro - Accepts Factory Spring 2 × $199.00
  - × Strange 1350 Series Transmission Yoke | Ford 31 Spline - Heavy Duty Nodular Iron 1 × $80.00
  - × Strange 1350 Series Transmission Yoke | Ford 31 Spline - Severe Duty Chrome Moly 1 × $179.00
  - × Strange 1350 Series Transmission Yoke | GM 27 Spline - Severe Duty Chrome Moly 1 × $179.00
  - × Strange 1350 Series Transmission Yoke | GM 27 Spline - Severe Duty Chrome Moly | For Roller Bearing Extension Housing 1 × $196.00
  - × Single Adjustable Rear Shock | 1982-2002 Camaro, Firebird, & Trans Am 1 × $160.00
  - × Strange Chrome Moly 1350 Series Yoke | Fits Ford 8.8 Rear Ends 2 × $142.00
  - × Strange HD 1350 Series Yoke | Fits Ford 8.8 Rear Ends 1 × $89.50
  - ×
    LPW Axle Tube Brace Kit Fits LPW Ultimate Covers For GM 10 Bolt, 12 Bolt, & '86-'04 Ford Mustang 8.8
    7 × $120.00
  - × Spring Seat Adjuster Wrench | For Strange Shocks & Struts 4 × $15.00
  - × Strange Chrome Moly 1350 Series Yoke | Fits Ford 9" Rear End with 35 Spline Pinion Gear | Chrome Plated Finish 1 × $195.00
  - × Strange Chrome Moly 1350 Series Yoke | Fits Ford 9" Rear End with 28 Spline Pinion Gear 1 × $125.00
  - × Strange Billet 1350 Series Yoke | For Ford 9" Using 28 Spline Pinion Shaft 1 × $280.00
  - × Strange Aluminum 1350 Series Yoke | For Ford 9" Using 28 Spline Pinion Shaft 1 × $250.00
  - × Wilwood 11" Street Brake Kit Fits Late Big Ford Housing Ends For GM Staggered Shock Applications 3 × $599.00
  - × Wilwood 12.190" Street Brake Kit | With Black Calipers - Fits Late Big Ford Housing Ends 1 × $750.00
  - × Ford 9" Center Section Gasket | Fel Pro High Performance 1 × $15.00
  - × Ford 9" Center Section Gasket | Silicone Imprinted & Steel Reinforced 1 × $25.00
  - × 1 Magnet Pick-Up Collar | For Strange 9" Ford Premium 28 Spline Yokes 2 × $48.00
  - × Single Adjustable Front Shock | 1993-2002 Camaro, Firebird, & Trans Am | Drag Race Only 2 × $160.00
  - × 1 Magnet Pick-Up Collar | For Strange 9" Ford 35 Spline Yokes 1 × $48.00
  - × Spring Seat Bearing Kit | For Strange Aluminum Struts & Coil-Over Shocks 2 × $38.00
  - × 4 Magnet Pick-Up Collar | For Strange Chrome Moly Yokes | Will Not Fit Ford 9" Yokes 1 × $60.00
  - × Strange Weld Yoke - Forged Chrome Moly | For 3" OD x .083" Wall Tubing & 1350 Series U-Joint 1 × $65.00
  - × Strange Weld Yoke - Forged Chrome Moly | For 3 1/2" OD x .083" Wall Tubing & 1350 Series U-Joint 1 × $70.00
  - × Spicer Weld Yoke - Cast Iron | For 3" OD x .083" Wall Tubing & 1310 Series U-Joint 1 × $25.00
  - × Spicer Weld Yoke - Cast Iron | For 3" OD x .083" Wall Tubing & 1330 Series U-Joint 1 × $25.00
  - × Pinion Support Bearing Kit | For OEM Ford Support (Non-Daytona) 1 × $55.00
  - × Mopar 8 3/4" 3.23 Standard Gear - 489 Case | US/Strange Gear - Produced in USA 1 × $411.05
  - × Mopar 8 3/4" 3.55 Standard Gear - 489 Case | US/Strange Gear - Produced in USA 1 × $265.00
  - × Mopar 8 3/4" 3.55 Standard Gear - 489 Case | Motive Performance Gear - Produced in Italy 1 × $263.00
  - × Mopar 8 3/4" 3.73 Standard Gear - 742 Case | Motive Performance Gear - Produced in Italy 1 × $258.00
  - × Pinion Support Bearing Kit | For Daytona Style Supports 2 × $42.00
  - × Mopar 8 3/4" 3.73 Standard Gear - 489 Case | US/Strange Gear - Produced in USA 1 × $265.00
  - × Drum Brake Kit | For Late Big Ford Housing Ends 1 × $495.00
  - × U-Bolt Kit For 1350 Series Yokes 1 × $12.00
  - × Heavy Duty U-Joint Cap Kit | Fits Strange 1350 Series Rear End Yokes 1 × $85.00
  - × Mopar 8 3/4" 3.91 Standard Gear - 489 Case | US/Strange Gear - Produced in USA 1 × $265.00
  - × Pinion Support Bearing Kit | For Use With 28 Spline Pinion Shaft 2 × $75.00
  - × Heavy Duty U-Joint | Spicer® 1350 Series 1 × $29.00
  - × Heavy Duty U-Joint | Spicer® 1330 Series 1 × $19.00
  - × US Strange / Mopar 8.75 / 4.10 / 29 spline pinion / For 489 case 1 × $411.05
  - × Conversion U-Joint 1310 Series To 1350 Series 1 × $32.00
  - × Mopar 8 3/4" 4.10 Standard Gear - 489 Case | Motive Performance Gear - Produced in Italy 1 × $265.00
  - × Conversion U-Joint | 1.125" 1330 Series to 1350 Series 1 × $32.00
  - × Conversion U-Joint | 1.125" OD Using Inner Clips to 1350 Series 1 × $32.00
  - × Pinion Support Bearing Kit | For Use With 35 Spline Pinion Shaft 2 × $75.00
  - × Single Piston Caliper with 1 3/4" Piston | For Strange 10" Front Steel Brake Kits 1 × $85.00
  - × LPW HD Aluminum Support Cover | Fits Chevy 12 Bolt Passenger Cars 2 × $169.00
  - × Two Piston Aluminum Caliper | For Strange Medium Duty Brake Kits 1 × $90.00
  - × Strange 4 Piston Directional Caliper - RH Side 1 × $159.00
  - × LPW Ultimate Support Cover | For Chevy 12 Bolt Cars - Accepts Brace Kit 1 × $169.00
  - × Strange Pro Series Rear Brake Kit | For Late | Big Ford Ends with 2.500" Brake Offset | With Slotted Rotors, Four Piston Calipers & Soft | Metallic Pads 2 × $595.00
  - × Side Bearing Kit | GM 12 Bolt and Ford 8.8" 3 × $40.00
  - × Ultra Carbon Caliper | For Pro Carbon Brake Kits | Fits Two Piece Pro Stock Axles & 9 1/2" Live Axle 1 × $385.00
  - × Ultra Carbon Caliper | For Pro Carbon Brake Kits | Fits Floater Kits, Pro Mod Housings, & Many Live Axles 1 × $385.00
  - × Strange Caliper Kit - 1 3/4" Piston | With Slider Assembly & Soft Metallic Pads 1 × $255.00
  - × Strange Pro Series Lightweight Steel Spool | For Dana 60 with 35 Spline Axles | Fits 3 Series Gear Sets 1 × $190.00
  - × Strange Pro Series Lightweight Steel Spool | For Dana 60 with 35 Spline Axles | Fits 5 Series Gear Sets 2 × $190.00
  - × Strange Pro Series Lightweight Steel Spool | For Dana 60 with 40 Spline Axles | Fits 3 Series Gear Sets 1 × $280.00
  - × Strange Pro Series Rear Brake Kit | For 1957-1964 Olds Housing Ends | With Slotted Rotors, Four Piston Calipers & Hard Metallic Pads 1 × $595.00
  - × GM 12 Bolt Car Aluminum Main Caps | Includes Bolts - Machining Required 2 × $88.00
  - × Spicer Trac-Lok Clutch Style Differential | Fits Dana 60 With 35 Spline Axles - 5 Series 1 × $495.00
  - × Eaton Truetrac Differential | Fits Dana 60 With 35 Spline Axles - 3 Series 1 × $750.00
  - × Eaton Detroit Locker | Fits Dana 60 With 35 Spline Axles - 3 Series 1 × $850.00
  - × Eaton Detroit Locker | Fits Dana 60 With 35 Spline Axles - 5 Series 1 × $750.00
  - × Housing Ends | Small GM - For 3.150" Bearing 1 × $95.00
  - × Caliper O-Ring Kit | For 1996 & Newer Strange Two Piston Caliper 1 × $5.00
  - × Caliper O-Ring Kit | For Strange Four Piston Directional Caliper 1 × $9.00
  - × Caliper O-Ring Kit | For Strange Four Piston 1996 and Older Caliper 1 × $11.00
  - × Caliper O-Ring Kit | For Billet Caliper Using Carbon Brakes 1 × $9.00
  - × GM 12 Blt 3.31 Standard Gear Set | US/Strange Gear - Produced in USA 1 × $272.00
  - × Caliper O-Ring Kit | For Strange Low Profile Caliper 1 × $9.00
  - × Strange Pro Series HD Aluminum Spool | Fits Ford 9" with 40 Spline Axles | Requires 3.812" Bore Strange Case 1 × $399.00
  - × Strange Pro Series Lightweight Steel Spool | Fits Ford 9" with 33 Spline Axles 1 × $190.00
  - × Strange S-Series Aluminum Spool | For Ford 9" with 31 Spline Axles 1 × $150.00
  - × Strange S-Series Aluminum Spool | For Ford 9" with 28 Spline Axles 2 × $150.00
  - × Eaton Truetrac Differential | Fits 9" Ford With 35 Spline Axles | Requires Aftermarket 3.250" Bore Case 1 × $795.00
  - × Eaton Truetrac Differential | Fits 9" Ford With 31 Spline Axles 1 × $563.00
  - × Auburn Pro Series Differential | Fits 9" Ford With 31 Spline Axles 1 × $555.00
  - × 31 Spline Open Differential For 9" Ford 1 × $395.00
  - × US Gear Clutch Style Differential | Fits 9" Ford With 28 Spline Axles 1 × $410.00
  - × Brake Pad | Soft Metallic | For Strange Four Piston Caliper 1 × $18.00
  - × GM 8.6 Camaro 4.10 Gear Set | Motive Performance Gear - Produced in Italy 1 × $333.00
  - × Brake Pad | Hard Metallic | For Strange Four Piston Caliper 1 × $18.00
  - × Brake Pad | Soft Metallic | For Wilwood 2 Piston Caliper 1 × $15.00
  - × Brake Pad | Soft Metallic | For Wilwood and JFZ Four Piston Calipers 1 × $20.00
  - × Brake Pad | Hard Metallic | For Wilwood and JFZ Four Piston Calipers 1 × $20.00
  - × Strange 10" Slotted Steel Rotor | For Strange Aluminum Strut - LH Side | Fits Spindle Mount Wheels Requiring 1 1/2" Offset 1 × $130.00
  - × Strange Aluminum Pinion Support | For Street, Street / Strip, and Track Use 2 × $140.00
  - × Strange S-Trac Differential | Fits 8.8 Ford With 35 Spline Axles | Includes Special Side Bearings , Races, & Shims 1 × $1,295.00
  - × Eaton HD Clutch Style Differential | Fits 8.8 Ford With 31 Spline Axles 1 × $495.00
  - × Auburn Pro Series Differential | Fits 8.8 Ford With 31 Spline Axles 1 × $565.00
  - × Auburn Pro Series Differential | Fits 8" Ford With 28 Spline Axles 1 × $555.00
  - × Strange Pro Series Lightweight Steel Spool | Fits Ford 8.8 with 33 Spline Axles 2 × $190.00
  - × 12 | Bolt Drop-Out Aluminum Case | 3.250" Bore - Fits Ford 9" Housing 1 × $627.00
  - × 12 Bolt Drop-Out Aluminum Case | | 3.062" Bore - Fits Ford 9" Housing 1 × $627.00
  - × Strange 9" Lightweight Aluminum Case | 3.062" Bore - Polished 2 × $595.00
  - × Strange 9" Lightweight Aluminum Case | 3.250" Bore 2 × $380.00
  - × Strange 9" Lightweight Aluminum Case | 3.250" Bore - Polished 1 × $595.00
  - × Strange HD Pro Aluminum Case Kit | 3.250" Bore With Tapered Bearing Support 1 × $684.00
  - × Strange HD Pro Aluminum Case Kit | 3.812" Bore With Tapered Bearing Support 3 × $684.00
  - × Seamless Chrome Moly Driveshaft Assembly | With HD Trans Yoke, 1350 Weld Ends & U-joints | For Strange S60 Installed in 1993-2002 GM F-Body 2 × $345.00
  - × Strange HD Pro Aluminum Case Kit | 3.812" Bore With Tapered / Ball Bearing Support 1 × $699.00
  - × Carbon Brake Pad | For Single Piston Carbon Calipers | Fits Strange Spindle Mount Carbon Brake Kits 1 × $135.00
  - × Carbon Brake Pad | For 4 Piston Calipers | Fits Strange 11" & 11.5" Carbon Brake Kits 1 × $162.50
  - ×
    Carbon Brake Pad For 4 Piston Calipers - Slotted at 1 o'clock Fits Strange 11" & 11.5" Carbon Brake Kits
    1 × $175.00
  - ×
    Carbon Brake Pad For 4 Piston Calipers - Slotted at 11 o'clock Fits Strange 11" & 11.5" Carbon Brake Kits
    1 × $175.00
  - × Strange Tapered Bearing Pinion Support | Fits 9" Ford Center Sections Used For Drag Racing 2 × $130.00
  - × Carbon Brake Pad | For 6 Piston Calipers | Fits Strange 11" & 11.5" Carbon Brake Kits 1 × $154.00
  - × Carbon Brake Pad Heat Shield | .060" Thick Stainless Steel - Each 1 × $9.00
  - × Hyperco Springs | 7" x 2 1/2" ID - 200 Lbs 1 × $130.00
  - × 11 1/2" Carbon Brake Rotor | For Strange 9 1/2", 10 1/2", 12", and 12 1/4" Live Axles 1 × $1,150.00
  - × Yukon HD Clutch Style Differential - 3 Series | Fits Chevy 12 Bolt With 33 Spline Strange Axles 3 × $625.00
  - × Strange Tapered Bearing Pinion Support - Polished | Fits 9" Ford Center Sections Used For Drag Racing 2 × $170.00
  - × Eaton Truetrac Differential - 3 Series | Fits Chevy 12 Bolt Passenger Car With 30 Spline Axles 1 × $498.00
  - × Hyperco Springs | 7" x 2 1/2" ID - 500 Lbs 1 × $130.00
  - × Strange Pro Series Lightweight Steel Spool | For Chevy 12 Bolt Car with 35 Spline Axles | Fits 4 Series Gear Sets 1 × $190.00
  - × Strange Pro Series Lightweight Steel Spool | For Chevy 12 Bolt Car with 33 Spline Axles | Fits 3 Series Gear Sets 1 × $190.00
  - × Strange Pro Series Lightweight Steel Spool | For Chevy 12 Bolt with 33 Spline Axles | Fits 4 Series Gear Sets 1 × $190.00
  - × Hyperco Springs | 8" x 2 1/2" ID - 225 Lbs 1 × $130.00
  - × Strange Pro Series Lightweight Steel Spool | For Chevy 12 Bolt with 30 Spline Axles | Fits 4 Series Gear Sets 1 × $190.00
  - × Strange S-Series Steel Spool | For Chevy 12 Bolt Car with 30 Spline Axles 1 × $150.00
  - × Hyperco Springs | 8" x 2 1/2" ID - 275 Lbs 1 × $130.00
  - × Dual Master Cylinder - 1.032" Bore | Includes Dust Boot, Pushrod, & Fittings 1 × $85.00
  - × Dual Master Cylinder - 1.032" Bore | Includes Dust Boot, Pushrod, Fittings, & Reinforcing Plates 1 × $99.00
  - × Dual Master Cylinder - 1.125" Bore | Includes Dust Boot, Pushrod, & Fittings 2 × $85.00
  - × Manual Brake Conversion Kit | For 1979-1993 Mustang 1 × $169.00
  - × Master Cylinder Banjo Fitting | For Strange B3359 & B3360 Master Cylinders 1 × $25.00
  - × Strange Dual Remote Reservoir Kit 1 × $164.00
  - × Dual In-Line Fast Fill Master Cylinder | Includes Remote Mount Reservoir 1 × $550.00
  - × Strange S-Series Steel Spool | For GM 8.5 with 33 Spline Axles 1 × $150.00
  - × Strange S-Series Steel Spool | For GM 8.5 with 28 Spline Axles 1 × $150.00
  - × Strange S-Series Steel Spool | For Chevy 8.2 with Strange 33 Spline Axles 1 × $150.00
  - × Eaton HD Clutch Style Differential - 2.73 & Up | Fits Chevy 8.5 10 Bolt Rear Ends With 30 Spline Axles 1 × $575.00
  - × Eaton HD Clutch Style Differential - 2.73 & Up | Fits Chevy 8.5 10 Bolt Rear Ends With 28 Spline Axles 1 × $510.00
  - × Auburn Pro Series Differential | Fits 64-72 Chevy 8.2 10 Bolt Rear Ends 1 × $545.00
  - × Auburn HP Series Differential - 3.23 & Up | Fits GM 7.5 10 Bolt Rear Ends With 28 Spline Axles 1 × $467.00
  - × Strange Steering Box - 13" | For Funny Cars & Altereds 1 × $525.00
  - × Strange Steering Box - 14" | For Funny Cars & Altereds 1 × $525.00
  - × Master Cylinder Rebuild Kit | For Strange B3360 & B3360TA 1 × $52.00
  - × Strange Steering Box - 14" | For Funny Cars & Altereds (Less Pitman Arm) 1 × $512.00
  - × Strange Steering Box - 15" | For Funny Cars & Altereds 1 × $525.00
  - × 2014-17 Corvette 3.90 Standard Gear Set | Motive V888390 Performance Gear - Produced in Italy 2 × $849.00
  - × Strange Pro Series Lightweight Steel Spool | Fits Mopar 8 3/4" with 35 Spline Axles 1 × $190.00
  - × Strange Pro Series Aluminum Spool | Fits Mopar 8 3/4" with 35 Spline Axles 1 × $399.00
  - × Strange Brake Pressure Gauge | Includes Bleed Screw Adapter Fitting 3 × $40.00
  - × Strange Adjustable Proportioning Valve 1 × $49.00
  - × Strange Dragster / Altered Spindles | With Tow Loops - Pair 1 × $415.00
  - × Tow Loop | For Strange Dragster / Altered Spindles 1 × $30.00
  - × Strange Pro Series 9" Case Nodular Iron - 3.062" Bore 1 × $329.00
  - × Strange Pro Series 9" Case Nodular Iron - 3.250" Bore 1 × $329.00
  - × 2014-17 Corvette 4.10 Standard Gear Set | Motive V888410 Performance Gear - Produced in Italy 1 × $849.00
  - × Solid Adjuster Nuts - Pr | Fits Strange 3.250" Bore Cases 1 × $37.66
  - × Dana 36 Corvette 3.73 Gear Set - Thick | US/Strange Gear - Produced in USA 1 × $370.00
  - × External Residual Pressure Valve - 2 Lb 1 × $22.00
  - × External Residual Pressure Valve - 10 Lb 1 × $22.00
  - × Master Cylinder Adapter Fitting | 1/2"-20 Inverted Flare to 3 AN 1 × $9.00
  - × 1997-2013 Corvette 3.42 Gear Set | Motive Performance Gear - Produced in Italy 2 × $454.00
  - × Braided Stainless Steel Brake Line - 20" | Teflon® lined With Straight 3 AN Fittings 1 × $21.00
  - × Braided Stainless Steel Brake Line - 24" | Teflon® lined With Straight 3 AN Fittings 1 × $21.00
  - × Drag Race Door Car Front Plumbing Kit | With 3 AN Braided Stainless Steel Lines & Fittings 1 × $88.00
  - × Dragster Rear Plumbing Kit | With 3 AN Braided Stainless Steel Lines & Fittings 1 × $92.00
  - × 1997-2013 Corvette 3.73 Gear Set | Motive Performance Gear - Produced in Italy 1 × $454.00
  - × 1997-2013 Corvette 3.90 Gear - 2 Series | Motive Performance Gear - Produced in Italy 1 × $492.00
  - × 1997-2013 Corvette 3.90 Gear Set | Motive Performance Gear - Produced in Italy 2 × $454.00
  - × OEM Ford Daytona Pinion Support | Cast Iron - With Races Installed 1 × $95.00
  - × Strange Polished Aluminum Pinion Support | For Street, Street / Strip, and Track Use 1 × $187.00
  - × Strange Ball Bearing Pinion Support | Includes Bearings & Seal For 28 Spline Pinion | Fits 9" Ford Center Sections Used For Drag Racing 1 × $295.00
  - × Tapered Bearing Pinion Support | For Strange HD Pro Aluminum Case 1 × $165.00
  - × 1997-2013 Corvette 4.11 Gear - 2 Series | Motive Performance Gear - Produced in Italy 1 × $492.00
  - × Dana 36 Corvette 3.54 Gear - Thick | Richmond Gear - Produced in Italy 1 × $360.00
  - × Dana 36 Corvette 3.54 Gear - Thick | US/Strange Gear - Produced in USA 2 × $370.00
  - × Double Adjustable Coil-Over Strut | 2010-2014 Camaro - Drag Race Only 1 × $499.00
  - × Double Adjustable Coil-Over Strut | 1982-1992 Camaro - Drag Race Only 2 × $499.00
  - × Mustang Front Strut Coil-Over Kit | 1987-1993 (V8 Spindles) | 1994-2004 (All Spindles) 2 × $74.00
  - × GM 7.5 10 Bolt Ring Gear Spacer | Adapts 2 Series Carrier to 3 Series Gear 1 × $45.00
  - × Mounting Plate - Finished | For Aluminum Dragster / Altered Housing 2 × $138.00
  - × 3.812" Billet Case and Support Package | With Tapered Bearing Pinion Support | For 9" or 9 1/2" 35 Spline Pro Gears 1 × $3,400.00
  - × 3.812" Billet Case and Support Package | With Tapered Bearing Pinion Support | For 10" Development 35 Spline Pro Gears 1 × $3,400.00
  - × 3.812" Billet Case and Support Package | With Taper / Ball Bearing Pinion Support | For 9" or 9 1/2" 35 Spline Pro Gears 1 × $3,510.00
  - × Computer Pick-Up Sensor Bracket Kit | Fits Strange Billet Case Pinion Support 3 × $30.00
  - × Ford 8" 2.80 Standard Gear Set | US/Strange Gear - Produced in USA 3 × $249.00
  - × Ford 8" 3.25 Standard Gear Set | US/Strange Gear - Produced in USA 4 × $238.00
  - × Ford 8" 3.55 Standard Gear Set | US/Strange Gear - Produced in USA 1 × $221.00
  - × Ford 8" 4.11 Standard Gear Set | Motive Performance Gear - Produced in Italy 4 × $213.00
  - × GM 7.5" & 7.625" 10 Bolt 2.73 Gear Set | Richmond Gear - Produced in Italy 3 × $267.00
  - × GM 7.5" & 7.625" 10 Bolt 3.08 Gear Set | Richmond Gear - Produced in Italy 3 × $267.00
  - × LPW Ultimate Support Cover | For 86-04 Mustang 8.8 - Accepts Brace Kit 2 × $169.00
  - × Ford 8.8 3.31 Standard Gear Set | Motive Performance Gear - Produced in Italy 2 × $257.00
  - × Ford 8.8 3.73 Standard Gear Set | US/Strange Gear - Produced in USA 4 × $195.00
  - × Ford Super 8.8 IRS 3.91 Standard Gear Set | US/Strange Gear - Produced in USA 3 × $256.00
  - × Ford Super 8.8 IRS 4.11 Standard Gear Set | US/Strange Gear - Produced in USA 2 × $256.00
  - × GM 7.5" & 7.625" 10 Bolt 3.23 Gear Set | Richmond Gear - Produced in Italy 2 × $248.00
  - × GM 7.5" & 7.625" 10 Bolt 3.42 Gear - 2 Series | Richmond Gear - Produced in Italy 2 × $248.00
  - × Ford 9" 3.50 Pro Gear with 35 Spline Pinion | US/Strange Gear - Produced in USA 1 × $450.00
  - × Ford 9" 3.70 Pro Gear with 35 Spline Pinion | US/Strange Gear - Produced in USA 1 × $450.00
  - × Ford 9" 3.70 Pro Gear with 35 Spline Pinion | Richmond Gear - Produced in Italy 1 × $418.00
  - × Ford 9" 3.89 Pro Gear with 35 Spline Pinion | US/Strange Gear - Produced in USA 1 × $450.00
  - × GM 7.5" & 7.625" 10 Bolt 3.42 Gear Set | Richmond Gear - Produced in Italy 1 × $243.00
  - × Ford 9 1/2" 3.40 Pro Gear with 35 Spline Pinion | US/Strange Gear - Produced in USA 1 × $512.00
  - × Ford 9 1/2" 3.70 Pro Gear with 35 Spline Pinion | US/Strange Gear - Produced in USA 1 × $512.00
  - × Ford 9 1/2" 3.89 Pro Gear with 35 Spline Pinion | Motive Performance Gear - Produced in Italy 1 × $509.00
  - × Ford 9 1/2" 4.11 Pro Gear with 35 Spline Pinion | US/Strange Gear - Produced in USA 1 × $498.00
  - × Strange Pro Series Rear Brake Kit | For H1143 Ends with 2.832" Brake Offset | With Slotted Rotors, Four Piston Calipers & Soft Metallic Pads 1 × $595.00
  - × GM 7.5" & 7.625" 10 Bolt 4.56 Gear - 2 Series | Richmond Gear - Produced in Italy 2 × $269.00
  - × GM 7.5" & 7.625" 10 Bolt 4.10 Gear Set | Richmond Gear - Produced in Italy 2 × $233.00
  - × GM 7.5" & 7.625" 10 Bolt 4.56 Gear Set | Richmond Gear - Produced in Italy 2 × $233.00
  - × Strange Single Adjustable Rear Shock | 2005-2014 Mustang - Lowered 1" to 1 1/2" 1 × $99.00
  - × LPW HD Aluminum Support Cover | Fits GM 8.2" & 8.5" 10 Bolt Rear Ends 1 × $169.00
  - × Strange Dragster Steering Rack | 12:1 Ratio - 14" Tie Rod Centers 1 × $379.00
  - × Strange Pro Series Aluminum Spool | Fits Ford 9" with 35 Spline Axles | Requires 3.250" Bore Aftermarket Case 1 × $350.00
  - × Front Pinion Race | For OEM Dana 60 & Strange S60 1 × $18.00
  - × Complete Installation Kit | For Strange S60 Rear End 2 × $180.00
  - × Strange Pro Series Lightweight Steel Spool | Fits Ford 8.8 with 35 Spline Axles 1 × $190.00
  - × Strange Pro Series Lightweight Steel Spool | Fits Ford 9" with 31 Spline Axles 1 × $190.00
  - × GM 8.2 10 Bolt 3.36 Gear Set | Motive Performance Gear - Produced in Italy 1 × $269.00
  - × Rear Pinion Bearing | For OEM Dana 60 & Strange S60 1 × $25.00
  - × GM 8.2 10 Bolt 3.55 Gear Set | Motive Performance Gear - Produced in Italy 1 × $269.00
  - × Strange S-Series Steel Spool | For Ford 9" with 31 Spline Axles 1 × $150.00
  - × Double Adjustable Rear Shock | Multiple GM Applications 2 × $260.00
  - × GM 8.2 10 Bolt 3.73 Gear Set | Motive Performance Gear - Produced in Italy 1 × $217.00
  - × Single Adjustable Rear Shock | Multiple GM Applications 2 × $160.00
  - × GM 8.2 10 Bolt 3.90 Gear Set | Motive Performance Gear - Produced in Italy 1 × $294.00
  - × GM 8.2 10 Bolt 4.11 Gear Set | Motive Performance Gear - Produced in Italy 1 × $183.00
  - ×