Menu

Pro II Stainless Dynamic Drive Mount Dual Rear Brake Kit
For 3.150" Symmetrical Housing Ends
Pro Series 2S Rotors, 4 Piston Billet Evolution 4 Calipers
& DTC-30 Semi Metallic Pads

$1,520.00

Part Number: B1710WCD2S

 
Designed Specifically For Drag Racing

Application
Symmetrical 3.150″ housing ends

Requires
H1131 housing ends or equivalent
• 2.832″ brake offset
• Ball style axle bearings *

* Caliper mount relief isn’t correct for tapered bearings

For Symmetrical 3.350″ ends – B1711WCD2S

Pro Series 2S Dynamic Drive Mount (DDM) Stainless Steel RotorsB2794LS / B2794RS
• Pro 2S Rotor mounts to Billet Aluminum DDM Hat – reducing rotating weight
• DDM system secures the rotor and allows for rotor thermal expansion – drastically reducing warping, coning, and cracking which are common with bolt retention designs
• DDM system design is secured by an internal Spirolox, eliminating heavy bolts and hardware- further reducing rotating weight
• Pro Series 2S rotors are machined and fully ground from Stainless Steel that exhibits 48% greater yield strength at 1,000° F compared to carbon steel- further maintaining rotor integrity
• Stainless steel Pro Series 2S rotors are highly resistant to heat and corrosion
• Directional Slots reduce rotating weight, increase air flow and promotes even heat dissipation.
• 11.250″ OD / .355″ thickness

Choice Of Billet Calipers

Black Billet Evolution 4 CalipersB1900
• Computer finite element analysis (FEA) optimized and field-tested caliper
• Evolution 4 design improves piston retraction, pedal feel, and stiffness
• High retraction piston and O-ring design to eliminate drag during acceleration
• Results in improved pad wear and exemplary braking efficiency
• Stainless steel pistons mitigate heat transfer to brake fluid
• All 1.750″ pistons provide maximum clamping force
• Two bleeder screws ensure complete air evacuation
• Type II Black anodized finish resists corrosion, heat & brake fluid

Red Billet CalipersB1900-RD
• Billet aluminum bodies are extremely rigid & reduce weight
• High retraction piston and O-ring design to eliminate drag during acceleration
• Results in improved pad wear and exemplary braking efficiency
• Stainless steel pistons mitigate heat transfer to brake fluid
• All pistons are 1.750″ to provide maximum clamping force
• Two bleeder screws ensure complete air evacuation
• Red powder coat finish resists corrosion, heat & brake fluid

Aluminum Dual Caliper Mounts
• Billet one piece design
• Eliminates bolts, spacers & nuts that require periodic maintenance

DTC-30 Semi Metallic Brake PadsB5010
• Provides the best starting-line cold holding power
• Recommended for vehicles going 150 MPH or less in the 1/4 mile

Housing End Bolt Kit
• Additional components not supplied in most aftermarket brake kits

Need More Wheel Clearance?
Evolution 4 Low Profile Caliper Option – OPRB13

Brake Hoses and Lines Are Not Included
Calipers are tapped 1/8″ NPT and supplied with a straight male 3 AN fitting

Use Teflon® tape or liquid on the pipe threads of the fitting
Leave a few threads from the tip uncoated
This will avoid depositing material inside the caliper
Torque fitting to 25 ft lbs
 

Description

Pro Series II DDM Dual Rear Kit for symmetrical ends w/Pro Series 2S rotors & dtc-30 semi metallic pads

You may also like…

  • B5010-Brake Pad  Soft Metallic  For Strange Four Piston Caliper

    DTC-30 Semi-Metallic Brake Pad For Strange Four Piston Caliper

    PN : B5010
    $25.00
    Add to cart
  • P2360-Strange Brake Pressure Gauge  Includes Bleed Screw Adapter Fitting

    Strange Brake Pressure Gauge Includes Bleed Screw Adapter Fitting

    PN : P2360
    $45.00
    Add to cart

Recently viewed products

×

Return Codes to use:
D DEFECTIVE / MISSING PARTS
O ORDERED THE WRONG ITEM
N NO LONGER NEED FOR MY BUILD
T THIS ISN’T WHAT I ORDERED.