Hard Metallic Brake Pad Wilwood & JFZ 4 Piston Caliper

Cart 1784
- - × Strange Pro Series II Dual Rear Brake Kit | For 1957-1964 Oldsmobile Housing Ends | With 2 Pc Slotted Rotors, Four Piston Calipers & Soft Metallic Pads 12 × $1,120.00
  - × 5/8" Stud Kit with .775" Wide Shank | Includes Lug Nuts & .250" Thick Washers 1 × $90.00
  - × Double Adjustable Front Shock | 2008-2010 Challenger - Drag Race Only 1 × $424.50
  - × Side Bearing Kit | Strange S60 | Ford 9" with 3.812" Bore Case 5 × $60.00
  - × Ford 9" 3.89 Standard Gear Set | Motive Performance Gear - Produced in Italy 8 × $238.00
  - ×
    LPW Axle Tube Brace Kit Fits LPW Ultimate Covers For GM 10 Bolt, 12 Bolt, & '86-'04 Ford Mustang 8.8
    18 × $120.00
  - × Ford 9" 3.89 Pro Gear with 35 Spline Pinion | Richmond Gear - Produced in Italy 5 × $446.00
  - × Ford 9" 4.30 Standard Gear Set | Motive Performance Gear - Produced in Italy 3 × $247.00
  - × LPW HD Aluminum Support Cover | Fits Chevy 12 Bolt Passenger Cars 5 × $169.00
  - × Strange Aluminum 1350 Series Yoke | For Ford 9" Using 28 Spline Pinion Shaft 3 × $250.00
  - × Ford 9" 3.25 Standard Gear Set | Motive Performance Gear - Produced in Italy 2 × $263.00
  - × Ford 8.8 4.56 Standard Gear Set | US/Strange Gear - Produced in USA 5 × $195.00
  - × Strange Aluminum 1350 Series Yoke | For Ford 9" Using 35 Spline Pinion Shaft 4 × $250.00
  - × Ford 8.8 5.14 Standard Gear Set | Motive Performance Gear - Produced in Italy 6 × $271.00
  - × Ford 9" 3.25 Standard Gear Set | US/Strange Gear - Produced in USA 5 × $217.00
  - × Ford 9" 4.86 Standard Gear Set | Motive Performance Gear - Produced in Italy 3 × $232.00
  - × Strange GM 12 Bolt 30 Spline C-Clip Axles | For 1967-1969 Camaro & 1964-1967 Chevelle - Pair 4 × $250.00
  - × Strange Pro Series Rear Brake Kit | For H1147 Ends with 2.500" Brake Offset | With Slotted Rotors, Four Piston Calipers & Hard Metallic Pads 9 × $595.00
  - × GM 12 Blt 5.38 Pro Gear Set | US/Strange Gear - Produced in USA 8 × $369.00
  - × Strange Pro Series II Rear Brake Kit | For Mopar Housing Ends - Includes Axle Bearings | With 2 Pc Slotted Rotors, Four Piston Calipers & Hard Metallic Pads 8 × $735.00
  - × Strange Pro Series II Dual Rear Brake Kit | | | For Mopar Housing Ends - Includes Axle Bearings | With 2 Pc Slotted Rotors, Four Piston Calipers & Hard Metallic Pads 11 × $1,120.00
  - × Strange Pro Series Front Brake Kit | Mopar Applications using Disc Brake Spindles | 4 Piston Calipers & One Piece Slotted Rotors 3 × $795.00
  - × Strange Pro Series II Front Brake Kit | Mopar Applications Using 9" Drum Brake Spindles | 4 Piston Calipers & Two Piece Slotted Rotors 6 × $895.00
  - × Axle Bearing With Locking Collar - Each | For 3.150" ID Housing End | Fits Axles With 1.5635" Bearing Area 1 × $40.00
  - × Dana 60 4.88 Standard Gear | Richmond Gear - Produced in Italy 2 × $248.00
  - × Strange Pro Series Rear Brake Kit | For 1957-1964 Olds Housing Ends | With Slotted Rotors, Four Piston Calipers & Hard Metallic Pads 14 × $595.00
  - × Strange Pro Series II Rear Brake Kit | For Mopar Housing Ends - Includes Axle Bearings | With 2 Pc Slotted Rotors, Four Piston Calipers & Soft Metallic Pads 11 × $735.00
  - × Ford 10" 4.57 Pro Gear with 35 Spline Pinion | US Gear Lightning Series - Produced in USA 4 × $1,125.00
  - × Dana 60 5.13 Standard Gear | Richmond Gear - Produced in Italy 1 × $251.00
  - × Ford 10" 4.11 Pro Gear with 35 Spline Pinion | US/Strange Gear - Produced in USA 5 × $934.00
  - × Strange Pro Series Dual Rear Brake Kit | For Mopar Housing Ends - Includes Axle Bearings | With Slotted Rotors, Four Piston Calipers & Soft Metallic Pads 12 × $1,020.00
  - × Ford 9" 4.57 Standard Gear Set | Motive Performance Gear - Produced in Italy 2 × $215.00
  - × Replacement Tapered Axle Bearing - Each | Fits Several Strange Street / Strip Eliminator Kits | Locking Collar Not Included 1 × $26.00
  - × Ford 9" Pinion Depth Shim Kit 1 × $15.00
  - × Strange Pro Series Front Brake Kit | Mopar Applications using Drum Brake Spindles | 4 Piston Calipers & One Piece Slotted Rotors 5 × $795.00
  - × Ford 9" Ring Gear Bolts | 7/16" For Clutch Style Differentials 4 × $9.00
  - × Strange Pro Series Rear Brake Kit | For H1147 Ends with 2.500" Brake Offset | With Slotted Rotors, Four Piston Calipers & Soft Metallic Pads 8 × $595.00
  - × Strange Pro Series II Dual Rear Brake Kit | | For Mopar Housing Ends - Includes Axle Bearings | With 2 Pc Slotted Rotors, Four Piston Calipers & Soft Metallic Pads 14 × $1,120.00
  - × GM 12 Blt 3.55 Standard Gear Set | US/Strange Gear - Produced in USA 1 × $272.00
  - × GM 8.4 Corvette 4.56 Gear - Thick | US/Strange Gear - Produced in USA 3 × $259.00
  - × Ford 8" 3.40 Standard Gear Set | Motive Performance Gear - Produced in Italy 3 × $273.00
  - × Pinion Support Spacer Kit | For Ultra Case Using 10" Pro Gear 2 × $61.00
  - × GM 12 Blt Truck 3.73 Standard Gear Set | Richmond Gear - Produced in Italy 1 × $215.00
  - × Strange Pro Series II Front Brake Kit | GM Applications using 4 3/4" Bolt Circle Wheels | 4 Piston Calipers & Two Piece Slotted Rotors 1 × $895.00
  - × Ford 8" 3.55 Standard Gear Set | US/Strange Gear - Produced in USA 6 × $221.00
  - × Ford 8" 3.80 Standard Gear Set | Motive Performance Gear - Produced in Italy 1 × $219.00
  - × Ford 8" 4.11 Standard Gear Set | Motive Performance Gear - Produced in Italy 3 × $213.00
  - × Pinion Support Bearing Kit | For Use With 35 Spline Pinion Shaft 4 × $75.00
  - × Ford 10" 3.89 Pro Gear with 35 Spline Pinion | US/Strange Gear - Produced in USA 2 × $934.00
  - × 11.250" Solid Brake Rotor | For All Strange S-Series Rear Brake Kits 1 × $120.00
  - × Strange Pro Series Rear Brake Kit | For 1957-1964 Olds Housing Ends | With Slotted Rotors, Four Piston Calipers & Soft Metallic Pads 11 × $595.00
  - × Pro Series Rear Brake Kit | For Strange Aluminum Dragster Housing | With Slotted Rotors, Four Piston Calipers & Hard Metallic Pads 12 × $665.00
  - × Strange 11 1/4" 2 Piece Rotor Assembly | For Pro Series II Brake Kits - Left Hand Side 3 × $195.00
  - × Ford 8.8 4.56 Standard Gear Set | Motive Performance Gear - Produced in Italy 4 × $231.00
  - × Single Piston Caliper with 1.75" Piston | For Strange Front Carbon Brake Kits | Using 10" Carbon Rotors & 2 Pc Spindle Mount Wheels 12 × $135.00
  - × Strange S-Series 9" Case | Nodular Iron - 3.062" Bore 5 × $249.00
  - × Ford 8.8 4.10 Standard Gear Set Motive Performance Gear - Produced in Italy 2 × $224.00
  - × Strange HD 1350 Series Yoke | Fits Ford 8.8 Rear Ends 2 × $89.50
  - × Double Adjustable Rear Shock | Multiple GM Applications 2 × $260.00
  - × Side Bearing Kit | Ford 9" with 2.891" Bore Case 4 × $45.00
  - × GM 8.4 Corvette 4.11 Gear - Thick | US/Strange Gear - Produced in USA 5 × $259.00
  - × 1997-2013 Corvette 3.42 Gear Set | Motive Performance Gear - Produced in Italy 1 × $454.00
  - × Ford 9 1/2" 3.89 Pro Gear with 35 Spline Pinion | US/Strange Gear - Produced in USA 1 × $498.00
  - × GM 8.6 Camaro 3.23 Gear Set | US/Strange Gear - Produced in USA 2 × $309.00
  - × Strange 11.250" Front Brake Rotor | Tapered Design - Left Hand Side 2 × $145.00
  - × Ford 9" 5.67 Pro Gear with 28 Spline Pinion | US/Strange Gear - Produced in USA 7 × $389.00
  - × Strange GM 12 Bolt 30 Spline C-Clip Axles | For 1970-1972 Camaro & 1968-1972 Chevelle - Pair 3 × $250.00
  - × Strange Single Fast Fill Master Cylinder | Includes Remote Mount Reservoir 2 × $210.00
  - × Dual Master Cylinder - 1.032" Bore | Includes Dust Boot, Pushrod, & Fittings 1 × $85.00
  - × Ford 9" 3.00 Standard Gear Set | Motive Performance Gear - Produced in Italy 7 × $263.00
  - × GM 12 Blt 4.56 Standard Gear Set | Motive Performance Gear - Produced in Italy 7 × $194.00
  - × Strange Chrome Moly 1350 Series Yoke | Fits Dana 60 & Strange S60 Rear Ends 2 × $142.00
  - × Ford 8.8 Aluminum Main Caps | Includes Bolts - Machining Required 6 × $88.00
  - × Ford 8.8 3.90 Standard Gear Set | US/Strange Gear - Produced in USA 3 × $195.00
  - × Strange Chrome Moly 1350 Series Yoke | Fits GM 12 Bolt Rear Ends 3 × $142.00
  - × Strange Pro Series Front Brake Kit | 97-13 Corvette Reusing OEM Front Hubs | 4 Piston Calipers & One Piece Slotted Rotors 3 × $795.00
  - × LPW Ultimate Support Cover | For 86-04 Mustang 8.8 - Accepts Brace Kit 3 × $169.00
  - × Housing Ends | 1965-1973 Small Ford 1 × $95.00
  - × Ford 9" 5.00 Standard Gear Set | US/Strange Gear - Produced in USA 3 × $217.00
  - × Strange Pro Series II Rear Brake Kit | For 1957-1964 Oldsmobile Housing Ends | With 2 Pc Slotted Rotors, Four Piston Calipers & Soft Metallic Pads 8 × $695.00
  - × Strange Pro Series Rear Brake Kit | For Early Big Ford Ends with 2.332" Brake Offset | With Slotted Rotors, Four Piston Calipers & Soft Metallic Pads 3 × $595.00
  - × LPW HD Aluminum Support Cover | Fits GM 8.2" & 8.5" 10 Bolt Rear Ends 4 × $169.00
  - × Strange S-Series 9" Case | Nodular Iron - 3.250" Bore 9 × $249.00
  - × Strange Chrome Moly 1350 Series Yoke | Fits Ford 9" Rear End with 35 Spline Pinion Gear 6 × $125.00
  - × LPW Ultimate Support Cover | Fits GM 8.2" & 8.5" 10 Bolts - Accepts Brace Kit 5 × $169.00
  - × LPW Ultimate Support Cover | For GM 12 Bolt Trucks - Accepts Brace Kit 4 × $169.00
  - × Ford 9" 4.71 Pro Gear with 35 Spline Pinion | Richmond Gear - Produced in Italy 1 × $408.00
  - × Ford 9" 4.86 Pro Gear with 35 Spline Pinion | US/Strange Gear - Produced in USA 12 × $405.00
  - × Complete Installation Kit | For 742 Case Using OEM Differential 2 × $129.00
  - × Strange 9" Lightweight Aluminum Case | 3.250" Bore 3 × $380.00
  - × Strange Pro Series II Front Brake Kit | 97-13 Corvette Reusing OEM Front Hubs | 4 Piston Calipers & Two Piece Slotted Rotors 2 × $895.00
  - × Ford 9" 4.57 Pro Gear with 35 Spline Pinion | Motive Performance Gear - Produced in Italy 6 × $402.00
  - × 11 1/2" Stainless Steel Rotor | For 2013 & Newer Floater Kits, | Aluminum Pro Mod Rear End - LH Side 3 × $215.00
  - × 11 1/2" Stainless Steel Rotor | For 2013 & Newer Floater Kits, | Aluminum Pro Mod Rear End - RH Side 3 × $215.00
  - × Strange Pro Series II Rear Brake Kit | For Strange Aluminum Dragster Housing | With | 2 Pc Slotted Rotors, Four Piston Calipers & Hard | Metallic Pads 11 × $695.00
  - × Ford 8.8 4.30 Standard Gear Set | Motive Performance Gear - Produced in Italy 3 × $240.00
  - × GM 8.5 10 Blt 4.88 Standard Gear Set | Richmond Gear - Produced in Italy 1 × $226.00
  - × Strange HD 1350 Series Yoke | For Ford 9" Using 28 Spline Pinion Shaft | Special for N2322 Pinion Support 2 × $89.50
  - × GM 8.5 10 Blt 3.73 Standard Gear Set | Richmond Gear - Produced in Italy 3 × $226.00
  - × Hyperco Springs | 12" x 2 1/2" ID - 225 Lbs 5 × $130.00
  - × Pro Series Steel Brake Completion Kit | For Strange P1020 Axle Package 1 × $545.00
  - × Hyperco Springs | 12" x 2 1/2" ID - 185 Lbs 7 × $130.00
  - × Complete Installation Kit | For GM 8.5" 10 Bolt With 30 or 33 Spline Axles 1 × $94.00
  - × Ford 9" Pinion Seal | For Ball Bearing Support | Using 28 Spline Pinion Gear 1 × $11.00
  - × Strange Pro Carbon Completion Kit | Carbon Rotors & Pads, Ultra Calipers, & 4 3/4" BC Hats | Caliper Mounts Are Not Included 1 × $2,850.00
  - × Ford 9" Pinion Seal | For Tapered Bearing Support | Using 35 Spline Pro Gear 1 × $9.00
  - × Strange Pro Series II Rear Brake Kit | For 1957-1964 Oldsmobile Housing Ends | With 2 Pc Slotted Rotors, Four Piston Calipers & Hard Metallic Pads 6 × $695.00
  - × GM 8.4 Corvette 3.55 Gear Set | US/Strange Gear - Produced in USA 1 × $259.00
  - × Ford 9" 5.43 Standard Gear Set | Motive Performance Gear - Produced in Italy 4 × $226.00
  - × Ford 9" 6.33 Standard Gear Set | Motive Performance Gear - Produced in Italy 4 × $242.00
  - × 11 1/2" Slotted Steel Rotor | For Strange 10 1/2" Live Axle | Also 9/9.5" Live Axles Produced After 2012 1 × $173.60
  - × Ford 9" 5.14 Standard Gear Set | US/Strange Gear - Produced in USA 4 × $217.00
  - × Hyperco Springs | 12" x 2 1/2" ID - 200 Lbs 5 × $130.00
  - × Ford 8" 4.62 Standard Gear Set | Richmond Gear - Produced in Italy 5 × $224.00
  - × Hyperco Springs | 14" x 2 1/2" ID - 150 Lbs 5 × $130.00
  - × Ford 9" 4.11 Pro Gear with 35 Spline Pinion | Richmond Gear - Produced in Italy 6 × $409.00
  - × Strange Pro Series II Front Brake Kit | 1987-Present Strange Aluminum Struts | 4 1/2" BC with 2 Piston Calipers & Two Piece Slotted Rotors 4 × $734.00
  - × Pro Series Rear Brake Kit | For Strange Aluminum Dragster Housing | With Slotted Rotors, Four Piston Calipers & Soft | Metallic Pads 6 × $595.00
  - × Ford 9" 5.67 Standard Gear Set | Motive Performance Gear - Produced in Italy 7 × $226.00
  - × Ford 9" 3.40 Pro Gear with 35 Spline Pinion | Richmond Gear - Produced in Italy 9 × $484.00
  - × Special Reluctor Ring - Each | Fits Strange Axle Package With Eliminator Kit | For 1994-2004 Mustang Using ABS 1 × $44.50
  - × Strange HD 1350 Series Yoke | For Ford 9" Using 28 Spline Pinion Shaft 2 × $89.50
  - × Ford Super 8.8 IRS 4.11 Standard Gear Set | US/Strange Gear - Produced in USA 3 × $256.00
  - × Strange HD Pro Aluminum Case Kit | 3.062" Bore With Tapered Bearing Support 2 × $684.00
  - × Housing Ends | Mopar - Special 3.150" Bore 2 × $100.00
  - × Hyperco Springs | 10" x 2 1/2" ID - 425 Lbs 5 × $130.00
  - × Hyperco Springs | 12" x 2 1/2" ID - 125 Lbs 4 × $130.00
  - × Hyperco Springs | 12" x 2 1/2" ID - 150 Lbs 11 × $130.00
  - × Hyperco Springs | 10" x 2 1/2" ID - 125 Lbs 10 × $130.00
  - × Eaton Detroit Locker Differential | Fits 8.8 Ford With 31 Spline Axles 3 × $745.00
  - × Eaton Detroit Locker Differential | Fits 9" Ford With 31 Spline Axles 1 × $625.00
  - × GM 8.5 10 Blt 3.23 Standard Gear Set | Richmond Gear - Produced in Italy 2 × $272.00
  - × Ford 9" 6.00 Standard Gear Set | Motive Performance Gear - Produced in Italy 2 × $242.00
  - × GM 8.5 10 Blt 4.10 Standard Gear Set | Richmond Gear - Produced in Italy 1 × $222.00
  - × Strange Pro Series Front Brake Kit | Mopar Applications using Disc Brake Spindles | 4 Piston Calipers & One Piece Slotted Rotors 2 × $795.00
  - × Strange Pro Series II Rear Brake Kit | For Strange Aluminum Dragster Housing | With | 2 Pc Slotted Rotors, Four Piston Calipers & Soft | Metallic Pads 12 × $695.00
  - × Ford Super 8.8 IRS 3.91 Standard Gear Set | US/Strange Gear - Produced in USA 6 × $256.00
  - × Ford 9" 5.29 Pro Gear with 28 Spline Pinion | Richmond Gear - Produced in Italy 3 × $408.00
  - × Ford 9" 5.83 Standard Gear Set | Motive Performance Gear - Produced in Italy 2 × $242.00
  - × Strange HD 1350 Series Yoke | For Dana 60 Using 29 Spline Pinion Shaft 1 × $90.00
  - × Hyperco Springs | 10" x 2 1/2" ID - 325 Lbs 8 × $130.00
  - × Strange 10" 2 Piece Rotor Assembly | For Multiple Brake Kits - Right Hand Side | Fits Spindle Mount Wheels Requiring 1" Offset 3 × $250.00
  - × Hyperco Springs | 12" x 2 1/2" ID - 85 Lbs 5 × $130.00
  - × 1997-2013 Corvette 4.11 Gear - 2 Series | Motive Performance Gear - Produced in Italy 2 × $492.00
  - × Strange Pro Series II Front Brake Kit | Mopar Applications using Drum Brake Spindles | 4 Piston Calipers & Two Piece Slotted Rotors 3 × $895.00
  - × 2014-17 Corvette 4.10 Standard Gear Set | Motive V888410 Performance Gear - Produced in Italy 2 × $849.00
  - × GM 12 Blt 4.56 Pro Gear Set | US/Strange Gear - Produced in USA 5 × $369.00
  - × Strange Pro Series Dual Rear Brake Kit | For 1957-1964 Oldsmobile Housing Ends | With Slotted Rotors, Four Piston Calipers & Soft Metallic Pads 13 × $1,020.00
  - × GM 8.6 Camaro 3.91 Gear Set | Motive Performance Gear - Produced in Italy 1 × $333.00
  - × GM 12 Blt 4.88 Pro Gear Set | US/Strange Gear - Produced in USA 6 × $369.00
  - × Pinion Support Bearing Kit | For Daytona Style Supports 7 × $42.00
  - × GM 12 Blt 4.11 Standard Gear Set | US/Strange Gear - Produced in USA 3 × $219.00
  - × Strange Pro Series Rear Brake Kit | For 1993-2002 Toyota Supra | With Slotted Rotors, Four Piston Calipers & Soft Metallic Pads 1 × $675.00
  - × Strange Pro Series 9" Case Nodular Iron - 3.250" Bore 4 × $329.00
  - × Strange Pro Series II Front Brake Kit | 1955-1957 Chevrolet Drum Brake Spindles | 4 Piston Calipers & Two Piece Slotted Rotors 3 × $895.00
  - × Strange Pro Series Front Brake Kit | 1955-1957 Chevrolet Drum Brake Spindles | 4 Piston Calipers & One Piece Slotted Rotors 2 × $795.00
  - × Strange Pro Series Front Brake Kit | GM Applications using Drum Brake Spindles | 4 Piston Calipers & One Piece Slotted Rotors 2 × $795.00
  - × Strange Pro Series II Front Brake Kit | 1987-Present Strange Aluminum Struts | 4 3/4" BC with 4 Piston Calipers & Two Piece Slotted Rotors 5 × $895.00
  - × Ford 9" Ring Gear Bolts | 7/16" For Strange Steel Spools 4 × $9.00
  - × Ford 9 1/2" 5.14 Pro Gear with 35 Spline Pinion | US/Strange Gear - Produced in USA 1 × $498.00
  - × Strange Pro Series II Front Brake Kit | GM Applications using 4 3/4" Bolt Circle Wheels | 4 Piston Calipers & Two Piece Slotted Rotors 2 × $895.00
  - × GM 12 Bolt Car Aluminum Main Caps | Includes Bolts - Machining Required 7 × $88.00
  - × Strange Pro Series Front Brake Kit | Ford Applications using 4 1/2" Bolt Circle Wheels | 4 Piston Calipers & One Piece Slotted Rotors 4 × $795.00
  - × 11 1/4" Slotted Steel Rotor | For Floater Kits Produced Before 2013 | With 5 1/2" Bolt Circle - Left Hand Side 2 × $173.60
  - × Ford Mustang OEM Reluctor Ring - Each | For 2005-2014 C-Clip Style Axle 1 × $49.00
  - × M 12 Blt 6.00 Pro Gear Set | US/Strange Gear - Produced in USA 1 × $369.00
  - × Strange Chrome Moly 1350 Series Yoke | Fits Ford 9" Rear End with 28 Spline Pinion Gear 4 × $125.00
  - × Dana 36 Corvette 3.75 Gear - Thick | Richmond Gear - Produced in Italy 3 × $413.00
  - × Mopar 8 3/4" 4.56 Standard Gear - 489 Case | US/Strange Gear - Produced in USA 1 × $265.00
  - × Strange Aluminum Pinion Support | For Street, Street / Strip, and Track Use 3 × $140.00
  - × Mopar 8 3/4" 3.73 Standard Gear - 489 Case | US/Strange Gear - Produced in USA 3 × $265.00
  - × GM 12 Blt 5.14 Pro Gear Set | US/Strange Gear - Produced in USA 3 × $369.00
  - × Hyperco Springs | 10" x 2 1/2" ID - 375 Lbs 7 × $130.00
  - × Strange Ultra Case and Support Package | 3.250" Bore Case & Tapered Bearing Support | With Installation Kit For 9" or 9 1/2" 28 Spline Pro Gears 1 × $1,134.00
  - × Side Bearing Kit | Ford 9" with 3.062" Bore Case 6 × $45.00
  - × Complete Installation Kit | For GM 8.2 10 Bolt Oldsmobile & Pontiac 1 × $94.00
  - × Mopar 8 3/4" 3.55 Standard Gear - 489 Case | US/Strange Gear - Produced in USA 1 × $265.00
  - × Pro Series 4 Piston Red Billet Caliper Kit | With Hard | Metallic Brake Pads & Mounting Hardware 1 × $449.00
  - × Ford 8.8 4.88 Standard Gear Set | US/Strange Gear - Produced in USA 2 × $195.00
  - × Strange Pro Series Aluminum Spool | Fits Ford 9" with 35 Spline Axles | Requires 3.250" Bore Aftermarket Case 1 × $350.00
  - × Side Bearing Kit | GM 8.5 10 Bolt with 30 / 33 Spline Carrier | Chevy 8.2 10 Bolt with Strange 33 Spline Spool 2 × $45.00
  - × Mopar 8 3/4" 4.30 Standard Gear - 489 Case | US/Strange Gear - Produced in USA 1 × $265.00
  - × Strange Pro Series II Front Brake Kit | 05-14 Mustang Reusing OEM Front Hubs | 4 Piston Calipers & Two Piece Slotted Rotors 1 × $795.00
  - × Strange Pro Series II Front Brake Kit | 1987-Present Strange Aluminum Struts | 4 3/4" BC with 2 Piston Calipers & Two Piece Slotted Rotors 7 × $734.00
  - × Ford 10" 5.67 Pro Gear with 35 Spline Pinion | US/Strange Gear - Produced in USA 4 × $934.00
  - × Strange Pro Series Front Brake Kit | 1987-Present Strange Aluminum Struts | 4 3/4" BC with 2 Piston Calipers & One Piece Slotted Rotors 4 × $634.00
  - × 9" Ford Tail Bearing Retainer 4 × $3.00
  - × Strange HD Pro Completion Kit | For Ball Bearing Pinion Support | Installing 35 Spline Pinion Gear 5 × $224.99
  - × Ford 9 1/2" 4.56 Pro Gear with 35 Spline Pinion | Motive Performance Gear - Produced in Italy 1 × $509.00
  - × Strange Pro Series II Rear Brake Kit | For H1147 Ends with 2.500" Brake Offset | | | With 2 Pc Slotted Rotors, Four Piston Calipers & Hard Metallic Pads 9 × $695.00
  - × Ford 10" 4.29 Pro Gear with 35 Spline Pinion | US/Strange Gear - Produced in USA 3 × $934.00
  - × Ford 9" 4.11 Pro Gear with 35 Spline Pinion | Motive Performance Gear - Produced in Italy 7 × $389.00
  - × Dana 36 Corvette 3.54 Gear - Thick | US/Strange Gear - Produced in USA 1 × $370.00
  - × Adjustable Pinion Preload Spacer | For Various Strange 9" Pinion Supports 1 × $20.00
  - × Strange Pro Series Front Brake Kit | Mopar Applications Using 9" Drum Brake Spindles | 4 Piston Calipers & One Piece Slotted Rotors 3 × $795.00
  - × Housing End Stud Kit - 3/8" 4 × $31.00
  - × Axle Bearing With Locking Collar - Each | For A1032 and A1092 Eliminator Kits | Fits Axles With 1.400" Bearing Area 1 × $45.00
  - × Ford 9" 5.14 Pro Gear with 28 Spline Pinion | US/Strange Gear - Produced in USA 7 × $389.00
  - × Ford 9" 5.43 Pro Gear with 28 Spline Pinion | US/Strange Gear - Produced in USA 6 × $389.00
  - × Strange Pro Series II Front Brake Kit | Mopar Applications using Disc Brake Spindles | 4 Piston Calipers & Two Piece Slotted Rotors 5 × $895.00
  - × Strange Pro Series II Front Brake Kit | Mopar Applications Using 10" Drum Brake Spindles | 4 Piston Calipers & Two Piece Slotted Rotors 3 × $895.00
  - × Ford 9" 3.50 Standard Gear Set | Motive Performance Gear - Produced in Italy 4 × $204.00
  - × Double Adjustable Rear Coil-Over Shock | 1982-2002 Camaro / Firebird / Trans Am - Spring Sold Separately 1 × $322.00
  - × GM 12 Blt 4.11 Standard Gear Set - Thick | US/Strange Gear - Produced in USA 2 × $219.00
  - × Brake Pad | Hard Metallic | For Strange Four Piston Caliper 2 × $18.00
  - × Ford 8.8 4.10 Standard Gear Set US/Strange Gear - Produced in USA 4 × $195.00
  - × Ford 9" Center Section Gasket 4 × $6.00
  - × Ford 8.8 3.73 Standard Gear Set | Motive Performance Gear - Produced in Italy 3 × $224.00
  - × GM 8.6 Camaro 3.73 Gear Set | US/Strange Gear - Produced in USA 2 × $309.00
  - × Housing End Stud Kit - 3/8" 5 × $38.00
  - × Hyperco Springs | 10" x 2 1/2" ID - 550 Lbs 5 × $130.00
  - × Strange 9" Lightweight Aluminum Case | 3.250" Bore - Polished 2 × $595.00
  - × Spring Seat Adjuster Wrench | For Strange Shocks & Struts 15 × $15.00
  - × GM 12 Blt 3.73 Standard Gear Set | US/Strange Gear - Produced in USA 3 × $219.00
  - × 12 | Bolt Drop-Out Aluminum Case | 3.250" Bore - Fits Ford 9" Housing 1 × $627.00
  - × Ford 9" 4.11 Standard Gear Set | US/Strange Gear - Produced in USA 4 × $217.00
  - × Hyperco Springs | 12" x 2 1/2" ID - 110 Lbs 3 × $130.00
  - × Strange Pro Series Front Brake Kit | 1987-Present Strange Aluminum Struts | 4 1/2" BC with 4 Piston Calipers & One Piece Slotted Rotors 4 × $795.00
  - × Strange Billet 1350 Series Yoke | For Ford 9" Using 28 Spline Pinion Shaft 1 × $280.00
  - × GM 8.5 10 Blt 3.08 Standard Gear Set | Richmond Gear - Produced in Italy 4 × $231.00
  - ×