Designed Specifically For Drag Racing
For Pro Series & Pro II Steel Rear Brake Kits
The Pad Material In This Kit Is Unsafe For Front Brake Applications
For Stainless Steel Brake Kit – See B1955
Four Piston Aluminum Directional Calipers – B5002 / B5004
• Aluminum bodies drastically reduce weight
• 1.625″ & 1.750″ pistons vary pressure decreasing pad taper
• Stainless steel pistons are corrosion resistant
• Anti-rattle clips reduce brake pad vibration and noise
Bolt Kit
• Four 3/8″-24 x 1.125″ grade 8 bolts
• Four 3/8″ ID .125″ thick washers
• Sixteen 3/8″ ID .025″ thick stainless steel alignment shims
DRM-35 Metallic Brake Pads – B5020
• Provides high resistance to brake fade
• Recommended for vehicles going over 150 MPH in the 1/4 mile
• Maintains decent starting-line cold holding capabilities
• May leave pad residue on rotors when not using parachute
• While common, it’s recommended to remove when installing new pads
Brake Hoses and Lines Are Not Included
Calipers are tapped 1/8″ NPT and supplied with a straight male 3 AN fitting
Use Teflon® tape or liquid on the pipe threads of the fitting
Leave a few threads from the tip uncoated
This will avoid depositing material inside the caliper
Torque fitting to 25 ft lbs
Related
Front / Rear kit with DTC-30 semi metallic pads – B1850
Rear kit with DRM-40 metallic pads – B1853
