Strange Billet 4 Piston Red Caliper Kit
With Soft Metallic Brake Pads


Part Number: B1950-RD

Designed Specifically For Drag Racing

Same Calipers Supplied in Pro II Stainless Steel Brake Kits
Can be used in most other Strange brake kits


Four Piston Billet Red CalipersB1900-RD
• Billet aluminum bodies are extremely ridged & reduce weight
• Pistons are machined from billet stainless steel
• Much stiffer than common stamped stainless pistons
• Highly resistant to deflection resulting in a very firm pedal
• All pistons are 1.750″ to provide maximum clamping force
• Red powder coat finish

Bolt Kit
• Four 3/8″-24 x 1.127″ NAS bolts
• Four 3/8″ ID .125″ thick washers
• Sixteen 3/8″ ID .025″ thick stainless steel alignment shims

Soft Metallic Brake PadsB5010
• Provides the best starting-line cold holding power
• Only material suitable for use in front steel applications
• Rear application in vehicles going 150 MPH or less in the 1/4 mile

Brake Hoses and Lines Are Not Included
Calipers are tapped 1/8″ NPT and supplied with male 3 AN fittings

Use Teflon® tape or liquid on the pipe threads of the fitting
Leave a few threads from the tip uncoated
This will avoid depositing material inside the caliper
Torque fitting to 25 ft lbs

Caliper Kits With Other Pads
Hard metallic pads – B1955-RD
High temp metallic pads – B1953-RD


Strange Red Billet Four Piston Caliper Kit – Soft Pads