Menu

HD Pro Aluminum Center Section
With Differential, Standard Gear & 1350 Series Yoke

$1,875.00

Part Number: PRF180

 
This Center Section May Not Fit Your Housing
Please refer to housing clearance diagram

HD Pro Case
3.062″ bore – 28 or 31 spline
3.250″ bore – 35 spline
• Manufactured from 206-T4 heat treated aluminum
• 12% higher yield and 32% higher tensile strength compared to 356-T6
• Large oil channel provides optimal lubrication to pinion bearings
• Heavily reinforced tail bearing area
• Chrome moly studs encapsulated by billet aluminum main caps
• Solid adjuster nuts
• Accepts over-sized tail bearing for heavy loads and high RPM

N2322
• Forged aluminum tapered bearing pinion support
• Pinion seal retaining plate and snap ring
• Races installed
• Support bolts, washers, and O-ring

Clutch Style Differential
28 or 31 spline – N1974 / N1970F

Standard Gear Set
3.00-6.50 ratio

HD Yoke & U-boltsU2203 / U1610
Designed for 1350 series U-joint

• Professionally Assembled
• Timken® Bearings & Races
• Grade 8 Ring Gear Bolts
• Ships in protective shipping container & HD cardboard box

Options
28 or 31 spline Eaton Truetrack – OPRF09
28 or 31 spline Eaton Detroit Locker – OPRF17
35 spline Strange Forged S-Trac – OPRF10
35 spline Eaton Cast Truetrack – OPRF11

Chrome moly yoke – OPRF07
HD yoke cap kit – OPRF37
 

Description

Strange HD Pro Aluminum Third Member With Differential

Aluminum Pinion Support with Differential, Standard Gear, and 1350 Series Yoke

The Strange HD Pro Ford 9 inch Aluminum Third Member With Differential is designed for Drag Race applications and for the most abusive Hi-Performance street/strip applications.

As with all Strange aluminum cases, it is crafted from 206-T4 heat treated aluminum. This premium aluminum has a 12% higher yield strength and a 32% higher tensile strength compared to commonly used 356-T6 aluminum.

The billet aluminum pinion support has a unique oil channel that is machined 360º into the support to maximize oil flow to the pinion bearings as well as a large slot in the front to further boost oil circulation. The support is in contact with the bore of the case in two locations as opposed to one as found in normal cases. This additional contact area holds the pinion shaft much more securely resulting in better bearing and gear life. The tail bearing is oversized to handle more load and greater RPM than a stock tail bearing. Billet aluminum main caps encapsulate chrome-moly studs, provide the utmost support for the carrier bearings and significantly reduce ring gear deflection.

There are several upgrade options available for differentials, and yokes for this aluminum third member.

Guidelines and Torque spec

You may also like…

  • OPRF37

    Upgrade From U-Bolts To Heavy Duty Cap Kit

    PN : OPRF37
    $83.00
    Read more
  • OPRF10

    Upgrade – For New Ford 9″ Center Section From Clutch Posi Unit to Strange 35 Spline S-Trac

    PN : OPRF10
    $646.00
    Read more
  • OPRF17

    Upgrade From Clutch Posi Unit To Eaton Detroit Locker

    PN : OPRF17
    $300.00
    Read more
  • OPRF11

    Upgrade From Clutch Posi Unit To Eaton 35 Spline Truetrack

    PN : OPRF11
    $346.00
    Read more

×

Return Codes to use:
D DEFECTIVE / MISSING PARTS
O ORDERED THE WRONG ITEM
N NO LONGER NEED FOR MY BUILD
T THIS ISN’T WHAT I ORDERED.