Menu

Strange HD Pro Aluminum Case Kit - 3.812" Bore
With Taper/Ball Bearing Pinion Support

$875.00

Part Number: P3207BB

 
Designed Specifically For Drag Racing
Taper/Ball bearing supports are not designed for street use

For Strange HD 40 spline spoolsD2002 / D2004

For D2000 40 spline spool – See P3203BB

Additional Parts Required
• HD Spool
• 9″ or 9 1/2″ gear set
• Yoke or coupler
• Completion kit
• Gasket

This Case May Not Fit Your Housing
Please refer to housing clearance diagram

Using 9 1/2″ Gear Set
Check gear diagram for proper clearance

HD Pro Case – 3.812″ Bore
• Manufactured from 206-T4 heat treated aluminum
• 12% higher yield and 32% higher tensile strength compared to 356-T6
• Large oil channel provides optimal lubrication to pinion bearings
• Heavily reinforced tail bearing area
• Chrome moly studs encapsulated by billet aluminum main caps
• Solid adjuster nuts
• Accepts over-sized tail bearing for heavy loads and high RPM
• Designed for 9″ or 9 1/2″ gear sets

N2323
• Forged aluminum taper / ball pinion support
• Pinion seal retaining plate and snap ring
• Timken® front race installed
• Support bolts, washers, and O-ring

Additional Components
• High capacity wide tail bearing
• Retainer plate and screws
• Pinion depth shim kit

Related
HD 40 spline spool – D2002 / D2004

28 spline yoke – U1603 / U1603B
35 spline yoke – U1604 / U1604B

28 spline coupler – U3627
35 spline coupler – U3629

Completion kit for 28 spline pinion – R3200SB
Completion kit for 35 spline pinion – R3200LB

Fel Pro gasket – H1112G
LubeLocker gasket – H1111S

Other Case Kits
3.062″ bore with taper/ball support – P3200BB
3.250″ bore with taper/ball support – P3203BB
3.812″ With tapered support – P3207
 

Description

Strange HD Pro Aluminum 3.812″ case kit with taper/ball bearing pinion support

Guidelines and Torque spec

You may also like…

  • H1111S-Ford 9" Center Section Gasket  Silicone Imprinted & Steel Reinforced

    Ford 9″ Center Section Gasket Silicone Imprinted & Steel Reinforced

    PN : H1111S
    $30.00
    Add to cart
  • U1603-Strange Chrome Moly 1350 Series Yoke  Fits Ford 9" Rear End with 28 Spline Pinion Gear

    Strange Chrome Moly 1350 Series Yoke Fits Ford 9″ Rear End with 28 Spline Pinion Gear

    PN : U1603
    $145.00
    Add to cart
  • R3200LB-Strange HD Pro Completion Kit  For Ball Bearing Pinion Support  Installing 35 Spline Pinion Gear

    Strange HD Pro Completion Kit For Ball Bearing Pinion Support Installing 35 Spline Pinion Gear

    PN : R3200LB
    $295.00
    Select options
  • R3200SB-Strange HD Pro Completion Kit  For Ball Bearing Pinion Support  Installing 28 Spline Pinion Gear

    Strange HD Pro Completion Kit For Ball Bearing Pinion Support Installing 28 Spline Pinion Gear

    PN : R3200SB
    $295.00
    Select options

×

Return Codes to use:
D DEFECTIVE / MISSING PARTS
O ORDERED THE WRONG ITEM
N NO LONGER NEED FOR MY BUILD
T THIS ISN’T WHAT I ORDERED.