Menu

Strange HD Pro Aluminum Case Kit - 3.250" Bore
With Taper/Ball Bearing Pinion Support

$875.00

Part Number: P3203BB

 
Designed Specifically For Drag Racing
Taper/Ball bearing supports are not designed for street use

For Strange 35 or 40 Spline SpoolsD1555 / D2000

For D2002 / D2004 40 spline spools – See P3207BB

Additional Parts Required
• Spool
• 9″ or 9 1/2″ gear set
• Yoke or coupler
• Completion kit
• Gasket

This Case May Not Fit Your Housing
Please refer to housing clearance diagram

Using 9 1/2″ Gear Set
Check gear diagram for proper clearance

HD Pro Case – 3.250″ Bore
• Manufactured from 206-T4 heat treated aluminum
• 12% higher yield and 32% higher tensile strength compared to 356-T6
• Large oil channel provides optimal lubrication to pinion bearings
• Heavily reinforced tail bearing area
• Chrome moly studs encapsulated by billet aluminum main caps
• Solid adjuster nuts
• Accepts over-sized tail bearing for heavy loads and high RPM
• Designed for 9″ or 9 1/2″ gear sets

N2323
• Forged aluminum taper/ball pinion support
• Pinion seal retaining plate and snap ring
• Timken® front race installed
• Support bolts, washers, and O-ring

Additional Components
• High capacity wide tail bearing
• Retainer plate and screws
• Pinion depth shim kit

Related
35 spline spool – D1555
40 spline spool – D2000

28 spline yoke – U1603 / U1603B
35 spline yoke – U1604 / U1604B

28 spline coupler – U3627
35 spline coupler – U3629

Completion kit for 28 spline pinion – R3200SB
Completion kit for 35 spline pinion – R3200LB

Fel Pro gasket – H1112G
LubeLocker gasket – H1111S

Other Case Kits
3.062″ bore with taper/ball support – P3200BB
3.812″ bore with taper/ball support – P3207BB
3.250″ bore with taper/taper support – P3203
 

Description

Strange HD Pro Aluminum 3.250″ case kit with taper/ball bearing support

Guidelines and Torque spec

You may also like…

  • D1555-Strange Pro Series Lightweight Steel Spool  Fits Ford 9" with 35 Spline Axles  Requires 3.250" Bore Aftermarket Case

    Strange Pro Series Lightweight Steel Spool Fits Ford 9″ with 35 Spline Axles Requires 3.250″ Bore Aftermarket Case

    PN : D1555
    $198.00
    Add to cart
  • D2000-Strange Pro Series Lightweight Steel Spool  Fits Ford 9" with 40 Spline Axles  Requires 3.250" Bore Aftermarket Case

    Strange Pro Series Lightweight Steel Spool Fits Ford 9″ with 40 Spline Axles Requires 3.250″ Bore Aftermarket Case

    PN : D2000
    $295.00
    Add to cart
  • H1111S-Ford 9" Center Section Gasket  Silicone Imprinted & Steel Reinforced

    Ford 9″ Center Section Gasket Silicone Imprinted & Steel Reinforced

    PN : H1111S
    $30.00
    Add to cart
  • R3200LB-Strange HD Pro Completion Kit  For Ball Bearing Pinion Support  Installing 35 Spline Pinion Gear

    Strange HD Pro Completion Kit For Ball Bearing Pinion Support Installing 35 Spline Pinion Gear

    PN : R3200LB
    $295.00
    Select options

×

Return Codes to use:
D DEFECTIVE / MISSING PARTS
O ORDERED THE WRONG ITEM
N NO LONGER NEED FOR MY BUILD
T THIS ISN’T WHAT I ORDERED.