Menu

Dual Master Cylinder - 1.032" Bore
Includes Dust Boot, Pushrod, & Fittings

$89.00

Part Number: B3360TA

 
Application
Vehicles with front and rear manual disc brakes
Manual drum brakes if used with 10 lbs residual valves

Overview
Pressure is delivered equally out of both ports
Volume is greater from the port closest to the push rod
An adjustable proportioning valve is highly recommended

Aluminum Master Cylinder With Plastic Reservoir
• 1.032″ bore size
• Cast aluminum body anodized for corrosion resistance
• Flange for firewall mounting – 21/64″ holes on 3.187″ centers
• Provisions for side mounting – .390″ holes on 5 1/2″ centers
• 1/2″-20 brake line holes with brass inverted flare seats
• 3/8″-24 x 4.200″ long push-rod
• Push-rod locking grommet
• Dust boot to protect piston bore
• 1/2″-20 brass inverted flare adapters for 3/6″ brake line
• 3/16″ brake line nuts

Recommended Pedal Ratio
• 5.5 to 1

Check Front & Rear Brake Pressure Before Using Vehicle
Silicone brake fluid is not recommended

Street – Factory Front Disc with Rear Drum
• Plumb the calipers to the outlet closest to the push rod
• Plumb the wheel cylinders to the outlet furthest from the push rod
• The drum brake line will require a 10 lbs residual valve

Street – Factory Front and Rear Disc Brakes
• Plumb the front calipers to the outlet closest to the push rod
• Plumb the rear calipers to the outlet furthest from the push rod

Street – Aftermarket Disc Brakes
• Consult the manufacturer for their recommendations

Drag Racing – Strange One or Two Piston Front and Four Piston Rear
• Plumb the front calipers to the outlet furthest from the push rod
• Plumb the rear calipers to the outlet closest to the push rod
• Mounting below caliper level requires 2 lbs residual pressure valves

Drag Racing – Strange Four Piston Front and Four Piston Rear
• Requires larger bore master cylinder – B3359TA

Drag Racing – Other Manufacturers
• Consult the manufacturer for their recommendations

Related
Brake pressure test gauge – P2360
2 lb residual pressure valve – B3366
10 lb residual pressure valve – B3367
Adjustable proportioning valve – B3369
Master with reinforcing plates – B3360
Master cylinder rebuilding kit – B3383
 

Description

Dual master cylinder assembly / 1.032″ bore

The Strange dual in-line master cylinder is ideal for vehicles requiring four wheel braking. The 1.032” bore master cylinder should be used if single piston or 2-piston calipers are used for the front and 4-piston on the rear. The Strange Dual Master Cylinder is comprised of an impact resistant polymer reservoir and an aluminum body to accommodate dual threaded fittings (1/2 X 20).

This Dual master cylinder can be mounted either on the firewall, like most OEM configurations or to the frame rail via the side mounting holes that are cast into the body.

The use of an adjustable proportioning valve is highly recommended. The proportioning valve reduces the pressure to the rear brakes – regardless of what type of brakes a car has because the rear brakes require less force than the front brakes.

Rebuild kits and services are available for the Strange dual master cylinders. Strange offers adjustable proportioning valves, residual valves, and pressure test gauges to optimize your brake system.

The 1.125″ Bore Master Cylinder should be used if 4 piston Calipers are on the front and rear.

Parts List and Installation Guide pdf File

You may also like…

  • B3360-Dual Master Cylinder - 1.032" Bore  Includes Dust Boot, Pushrod, Fittings, & Reinforcing Plates

    Dual Master Cylinder – 1.125″ Bore Includes Dust Boot, Pushrod, Fittings, Firewall Reinforcing Plates & Hardware

    PN : B3359
    $99.00
    Add to cart
  • B3383-Master Cylinder Rebuild Kit  For Strange B3360 & B3360TA

    Master Cylinder Rebuild Kit For Strange B3360 & B3360TA

    PN : B3383
    $52.00
    Add to cart
  • B3383-Master Cylinder Rebuild Kit  For Strange B3360 & B3360TA

    Master Cylinder Rebuild Kit For Strange B3359 & B3359TA

    PN : B3381
    $52.00
    Add to cart
  • B3360-Dual Master Cylinder - 1.032" Bore  Includes Dust Boot, Pushrod, Fittings, & Reinforcing Plates

    Dual Master Cylinder – 1.032″ Bore Includes Dust Boot, Pushrod, Fittings, Firewall Reinforcing Plates & Hardware

    PN : B3360
    $99.00
    Add to cart

×

Return Codes to use:
D DEFECTIVE / MISSING PARTS
O ORDERED THE WRONG ITEM
N NO LONGER NEED FOR MY BUILD
T THIS ISN’T WHAT I ORDERED.