Strange Pro Series II Dual Rear Brake Kit                                                         For H1143 Ends with 2.832″ Brake Offset                                                         With 2 Pc Slotted Rotors, Four Piston Calipers & High Heat Metallic Pads

/, Drag Race, Brake Kits / Components, Pro 2 pc Steel Dual Rear Kits, Make / Model, Make / Model, GM, GM, Brake Kits / Components, Pro Steel Dual Rear Brake Kits/

Strange Pro Series II Dual Rear Brake Kit                                                         For H1143 Ends with 2.832″ Brake Offset                                                         With 2 Pc Slotted Rotors, Four Piston Calipers & High Heat Metallic Pads

Strange Pro Series II Dual Rear Brake Kit                                                         For H1143 Ends with 2.832″ Brake Offset                                                         With 2 Pc Slotted Rotors, Four Piston Calipers & High Heat Metallic Pads

$1,120.00

Part Number: B1718WCDH2

Dual rear brake kit for Strange 3.150″ Small GM housing ends- H1143
Requires appropriate Strange axles using 1/2″ or 5/8″ screw-in wheel studs
Brake offset = 2.832″

Note- Caliper orientation differs from main picture to allow for shock clearance

This Strange rear brake kit includes:

Two Piece Floating Slotted Steel Rotors
– Floating design isolates rotor from hat to allow rotor growth and minimize distortion
– Slots improve air flow, assist in warpage prevention, and reduce weight

Four Piston Aluminum Directional Calipers with Stainless Steel Pistons
– Aluminum bodies drastically reduce weight
– Pistons are 1.625″ & 1.750″ to vary pressure on the pads decreasing pad taper
– Stainless steel pistons are corrosion resistant
– Anti-rattle clips reduce brake pad vibration and noise

Billet Aluminum Caliper Mounts
– One piece design eliminates spacers & bolts that require periodic maintenance

Housing End Stud Kit
– Additional components that are not supplied in most aftermarket systems

High Heat Metallic Brake Pads
– Provides the highest resistance to brake fade
– Recommended for vehicles going over 150 MPH in the 1/4 mile
– Pad residue on rotor surface dramatically reduced compared to hard metallic pads
– Not for vehicles requiring starting-line cold holding capabilities

Brake hoses and lines are not included
Calipers are tapped 1/8″ NPT and supplied with male 3 AN fittings

Description

Pro Series 2 Pc rotor dual rear kit for Strange 3.150″ Small GM ends with high heat pads

Additional information

Weight 40. lbs

You may also like…