Menu

40 Spline Floater Kit
For 4 3/4" Bolt Pattern Wheels
Includes Stainless Steel Dynamic Drive Mount Brake Kit

$3,250.00

Part Number: F22064

 
Designed Specifically For Drag Racing

Floater Kit For 4 3/4″ Bolt Circle Wheels
• Requires housing built with 3 1/4″ or 3 1/2″ O.D. tubes
• Floater axles – Sold separately

Advantages
Housing supports weight, bending loads, and tire shake
Axle shafts only requirement is to transfer torque
Prevents the possibility of axle flange breakage

Spindles
• 4130 chrome moly
• Machined with large inner bearing radius
• Vastly increases bending load strength
• Provides rigid support for hubs & bearings
• Designed for 3 1/4″ or 3 1/2″ O.D. housing tubing
• Finish turning required to suit axle tube I.D.

Spindle Radii Rings
• Mates with large spindle radius
• Creates positive inner bearing seat
• Machined from stainless steel
• Provides corrosion resistant sealing surface

DDM Floater Hubs
• 2024-T351 billet aluminum
• Machined for 4 3/4″ bolt circle
• Integral Dynamic Drive Mount (DDM)
• Secures rotor & allows for thermal expansion
• Drastically reduces rotor warping, coning & cracking common with other systems
• Black anodized finish

Choice Of Stainless Steel Rotors
• Stainless steel is highly resistant to heat and corrosion
• Exhibits 48% greater yield strength at 1,000° F compared to carbon steel
• Fully ground surface

Evolution S StainlessF2098NL / F2098NR
• Unique Aero Slot design reduces rotating weight and promotes even heat dissipation
• Scalloped design further reduces rotating weight
• Machined for Dynamic Drive Mount system
• 11.500″ O.D. – .355″ Thick
• 4.6 lbs

Heavy Duty StainlessF2056NL / F2056NR
• Directional slots reduce rotating weight
• Greater rotor mass for the most extreme conditions
• Machined for Dynamic Drive Mount system
• 11.500″ O.D. – .355″ Thick
• 5.3 lbs

Four Piston Billet Evolution 4 CalipersB1900
• Stainless steel pistons mitigate heat transfer to brake fluid
• Reverse dish pressure vessel piston maximizes stiffness
• High retraction piston and O-ring design to eliminate drag during acceleration
• Computer finite element analysis (FEA) optimized and field-tested calipers- Evolution 4 design improves piston retraction, pedal feel, and stiffness resulting in improved pad wear and exemplary braking efficiency
• All pistons are 1.750″ for increased clamping force

Choice of Brake Pads

DRM-35 Metallic Brake PadsB5020
• Provides high resistance to brake fade
• Recommended for vehicles going over 150 MPH in the 1/4 mile
• Maintains decent starting-line cold holding capabilities
• May leave pad residue on rotors when not using parachute
• While common, it’s recommended to remove when installing new pads

DTC-30 Semi Metallic Brake PadsB5010
• Provides the best starting-line cold holding power
• Recommended for vehicles going 150 MPH or less in the 1/4 mile

Caliper Mounts
• 6061-T6511 aluminum
• Clear anodized
• 3/8″-24 press nuts installed

Press-in Wheel Studs
• 8740 chrome moly
• Anti-rotational designed head
• .6865″ shank / 5/8″-18 threads
• Two lengths available *

* Please supply wheel thickness

Lug Nuts
• Flanged steel nuts
• Includes aluminum anti-marring washers

Steel Drive Plates
• 8620 hardened steel
• Scalloped design removes unnecessary weight
• Designed for 40 spline shaft with 45° pressure angle *
• Black oxide finish

* Inner axle splines can be made to suit other spools

Timken® Tapered Bearings & Races
• Premium components from a trusted name
• Ensures proper fit & long bearing life

Solid Preload Spacer
• Prevents excessive preload
• Maintains consistency

Spindle Nut Retention System
• Heat treated spindle nut tapped for set screws
• Twin tab nut retainer securely engages spindle
• Dog point set screws prevent nut rotation
• Ensures proper bearing preload is maintained

Mounting Hardware
• All premium grade
• Provides safety and security

Need More Wheel Clearence?
Evolution 4 Low Profile Caliper option – OPRB12

Related

Gun Drilled Floater Axles
Hy-Tuf 24″ or less – A2040H24
Hy-Tuf 24 1/8″ to 28″ – A2040H28
Hy-Tuf 28 1/8″ to 32″ – A2040H32
Hy-Tuf 32 1/8″ to 36″ – A2040H36

300M 20″ or less – A2040M
300M 20 1/8″ to 24″ – A2040M24
300M 24 1/8″ to 28″ – A2040M28
300M 28 1/8″ to 32″ – A2040M32
300M 32 1/8″ to 36″ – A2040M36

Solid Floater Axles
These axles are not stocked
Please allow extra time for manufacturing

Other Floater Kits
Stainless steel kit for 5″ bolt circle – F22065
Stainless steel kit for 5 1/2″ bolt circle – F2206
Carbon kit for 4 3/4″ bolt circle – F22064WC
Carbon kit for 5″ bolt circle – F22065WC
Carbon kit for 5 1/2″ bolt circle – F2206WC

Pro Touring
4 1/2″, 4 3/4″, or 5″ – F5010 / F5012
 

This product is only available from an Authorized Strange Dealer or Factory Direct Call - 800-646-6718 or Email Us

Description

40 spline floater kit for 4.75 BC with stainless steel brake kit

Floater Kits NEW GEN

Parts List and Installation Guide pdf File

You may also like…

  • 40 Spline Floater Kit For 5 1/2″ Bolt Pattern Wheels Includes Stainless Steel Dynamic Drive Mount Brake Kit

    PN : F2206
    $3,350.00
    Read more
  • 40 Spline Floater Kit For 5″ Bolt Pattern Wheels Includes Stainless Steel Dynamic Drive Mount Brake Kit

    PN : F22065
    $3,250.00
    Read more

×

Return Codes to use:
D DEFECTIVE / MISSING PARTS
O ORDERED THE WRONG ITEM
N NO LONGER NEED FOR MY BUILD
T THIS ISN’T WHAT I ORDERED.